HOME | DD

AlanMac95 — Darkness

Published: 2015-08-25 21:30:45 +0000 UTC; Views: 2986; Favourites: 14; Downloads: 42
Redirect to original
Description LORE:
When you activate this card, destroy all cards in your Spell and Trap Card Zones, then Set 1 "Zero", "Infinity", "Darkness 1", "Darkness 2", and "Darkness 3" at random from your hand or Deck. You cannot look at these face-down cards. During the End Turn, Set all face-up Trap Cards you control, and randomly rearrange all cards in your Spell and Trap Card Zone. If a Spell or Trap Card you control Leaves the field, destroy all Spell and Trap Cards you control.
___________________________________________________
Related content
Comments: 5

QueenDeVille [2015-08-26 06:02:53 +0000 UTC]

I think I said all I could say on this thing earlier. Also hooray for art for this thing I can look at without cringing

👍: 0 ⏩: 1

AlanMac95 In reply to QueenDeVille [2015-08-26 09:44:55 +0000 UTC]

Thx

👍: 1 ⏩: 0

stooge3 [2015-08-26 00:10:53 +0000 UTC]

Okay, 2 things.

1.  The fact that this card's effect specifies which cards the user sets from their hand or field seems to come in conflict with the part about setting them "at random".  And the part about not looking at the set cards.  Care to clear up that issue?

2.  What "end turn" does the effect about setting revealed trap cards and rearranging them refer to?  The end-phase after this card is activated?  Any of the user's end-phases where this card is active on their field?  Any of the opponent's end-phases where this card is active on the user's field?  Any combination of these 3 possibilities?

👍: 1 ⏩: 1

AlanMac95 In reply to stooge3 [2015-08-26 00:40:50 +0000 UTC]

These cards were used by Nightshroud in yugioh gx season 4 , if you watched the show you will understand , anyway .
___________
1- "Zero", "Infinity", "Darkness 1", "Darkness 2", and "Darkness 3" at random.
you put them Randomly on the spell/trap card zone . (of course after shuffling them and putting them backwards)

 then activate one of them ..and then like a chain
activate the others (the other cards effects depends on their number/time of activation and which card was activated the first  )

2- with each end turn you will have to repeat the same thing you did back in 1 ^ (backward/facedown, and shuffling them )


TCG has changed the term
*end-phase* into *end turn * that's why i used the term *End turn * .

👍: 1 ⏩: 1

stooge3 In reply to AlanMac95 [2015-08-26 01:28:18 +0000 UTC]

Ah.  I see.  Man, Yu-Gi-Oh! sure does make a lot of changes to the card-game.

👍: 1 ⏩: 0