HOME | DD

Description
photo on the left show how it will look, photo on the right is the sample to strap it up

1- Start by threading the camera's strap through the strap mount from the outside edge and back up through the plastic eyelet.

2- Take the strap through the top hole of the buckle and into the loop area. Open up the loop area so that it passes trough.

3- Pass it back towards the buckle hole so the flaps sits in between inner and outer straps.

4- Adjust the strap in small tweaks and ensure that the flap falls short of the mount. Pull the eyelet up to secure the straps.

This was first published in the DCMag (Digital Camera Magazine UK) in Oct. 2007

Nikon FA + 50mm f/2 + AN-4B strap, taken with the D80 + 50mm f/1.8 edited in Adobe Lightroom.

Description
photo on the left show how it will look, photo on the right is the sample to strap it up

1- Start by threading the camera's strap through the strap mount from the outside edge and back up through the plastic eyelet.

2- Take the strap through the top hole of the buckle and into the loop area. Open up the loop area so that it passes trough.

3- Pass it back towards the buckle hole so the flaps sits in between inner and outer straps.

4- Adjust the strap in small tweaks and ensure that the flap falls short of the mount. Pull the eyelet up to secure the straps.

This was first published in the DCMag (Digital Camera Magazine UK) in Oct. 2007

Nikon FA + 50mm f/2 + AN-4B strap, taken with the D80 + 50mm f/1.8 edited in Adobe Lightroom.