HOME | DD

Farumir β€” Werewolf mask WIP part 8

Published: 2014-02-02 20:07:07 +0000 UTC; Views: 2938; Favourites: 60; Downloads: 4
Redirect to original
Description Finally uploaded! I've been meaning to submit these photos since last week (been very busy as usual).

It's really coming along nicely now; the face (with some more added padding to fatten the cheeks and jawbone) is fully furred, shaved, and air-brushed to make the snarling and frowning features stand out more as much of the detail was lost under plain black fur. Besides real black wolves aren't completely black anyway if you pay attention to their fur; they do have specks of brown and grey here and there, especially around the muzzle and beneath the eyes. However the shades of grey aren't as strong as they are in the photos; I had to have the flash on my camera because I took these photos at night and you can't really see colors well on photos taken without flash at night (not with my samsung camera anyway). If I made the grey parts too strong for real then it'd look like it had a grey muzzle with old age rather than just some shading-tones, which I didn't want because the werewolf in the movie this is for is supposed to be WAY younger than the werewolf who bit the protagonist, but that's the only story-spoiler you're getting out of me!

Anyway, tomorrow my final semester begins...so I really REALLY need to finish this mask before the end of Febuary, because the deadline for the long-awaited Movie Trailer is May and the costume needs to be ready for shooting asap!

Next part of the WIP: fav.me/d7crflw
previous part of the WIP: fav.me/d6u0768
Related content
Comments: 28

Kreativjunkie [2014-04-02 17:24:25 +0000 UTC]

Cool! I like the wrinkles of the muscles on the nose and the expression

πŸ‘: 0 ⏩: 1

Farumir In reply to Kreativjunkie [2014-04-02 17:48:28 +0000 UTC]

Thanks, the mask is finally complete now too. fav.me/d7crflw ^^

πŸ‘: 0 ⏩: 0

UcIhAaSasuke [2014-03-13 19:59:39 +0000 UTC]

you should put a bit o hair on the holes , you could see and also it will look more credible Β 

πŸ‘: 0 ⏩: 1

Farumir In reply to UcIhAaSasuke [2014-03-13 20:44:34 +0000 UTC]

Holes?

πŸ‘: 0 ⏩: 1

UcIhAaSasuke In reply to Farumir [2014-03-15 11:49:51 +0000 UTC]

yes the ones to see Β near the eyes , putting som fur on would be cool

πŸ‘: 0 ⏩: 1

Farumir In reply to UcIhAaSasuke [2014-03-15 13:41:52 +0000 UTC]

But...they're already surrounded by fur. I don't quite get what you mean.

πŸ‘: 0 ⏩: 1

McKinleyMassacre In reply to Farumir [2014-04-07 15:08:46 +0000 UTC]

I'm not sure he knows it's a costume, I think he probably thinks it's a figure or something.

πŸ‘: 0 ⏩: 1

Farumir In reply to McKinleyMassacre [2014-04-07 20:56:04 +0000 UTC]

But it clearly says mask on the deviation's title. O.o

πŸ‘: 0 ⏩: 1

McKinleyMassacre In reply to Farumir [2014-04-07 22:45:06 +0000 UTC]

Some people miss obvious stuff

πŸ‘: 0 ⏩: 0

NINJAWERETIGER [2014-02-06 23:20:07 +0000 UTC]

That is awesome!

πŸ‘: 0 ⏩: 1

Farumir In reply to NINJAWERETIGER [2014-02-06 23:31:59 +0000 UTC]

Thanks, with a bit of luck (and a lot of praying lol) it should finally be all finished before 23/02/2014.

πŸ‘: 0 ⏩: 1

NINJAWERETIGER In reply to Farumir [2014-02-14 08:21:02 +0000 UTC]

You're welcome! And okay XD is that for a contest or something?

πŸ‘: 0 ⏩: 1

Farumir In reply to NINJAWERETIGER [2014-02-14 18:36:09 +0000 UTC]

No the shooting of the trailer for the movie it's going to be for.

πŸ‘: 0 ⏩: 1

NINJAWERETIGER In reply to Farumir [2014-02-15 00:27:36 +0000 UTC]

Oh okay and that's cool which movie is it?

πŸ‘: 0 ⏩: 1

Farumir In reply to NINJAWERETIGER [2014-02-15 13:39:14 +0000 UTC]

Mine, for university. The trailer is currently being made.

πŸ‘: 0 ⏩: 1

NINJAWERETIGER In reply to Farumir [2014-02-15 21:32:29 +0000 UTC]

Oh okay cool!

πŸ‘: 0 ⏩: 0

EscapeDesignFX [2014-02-05 22:20:23 +0000 UTC]

Looking GOOD!

πŸ‘: 0 ⏩: 1

Farumir In reply to EscapeDesignFX [2014-02-05 22:43:56 +0000 UTC]

Thanks, I hope to finally have it finished before the 23rd, I wanna present it in the lecture physically instead of just a photo.

πŸ‘: 0 ⏩: 0

Kgosi [2014-02-03 20:33:30 +0000 UTC]

I'm going to just point out, I left a critique on this when it was a fresh casted resin blank, and you said that I was wrong, and that everything would be fine once it was fured. However, the snout is still abnormally long, and terribly proportioned, and the snarl is very unnatural without the deep creases caused by skin folds. Proportionally, it looks like a Saluki dog.

πŸ‘: 0 ⏩: 1

Farumir In reply to Kgosi [2014-02-03 20:48:51 +0000 UTC]

You critiqued that the mouth would not open and I already proved that the mouth opens up perfectly in a video. If it was so badly proportioned then the moving mouth would not function.

And again it is not meant to be completely natural because it is a werewolf, not a wolf. A real wolf would not have such a brow nor fangs that large, which I wanted exposed to the fullest. The muzzles of most of the Howling werewolves and the alpha werewolf of Nature of the Beast are just as long as this mask's muzzle if not longer.

May not be anatomy-correct to a real wolf (which I stress it is not supposed to be), but it is realistic enough for an actual horror werewolf, otherwise it would not have been accepted into .

πŸ‘: 0 ⏩: 0

illo-inc [2014-02-02 21:42:36 +0000 UTC]

Not to piss on your bonfire m'love, but the deadline will be May.


πŸ‘: 0 ⏩: 2

Farumir In reply to illo-inc [2014-02-02 21:46:45 +0000 UTC]

...

Wait, that's only four months; we don't start the semester until tomorrow! How do they expect us to get a major project done in just four months?!

πŸ‘: 0 ⏩: 1

illo-inc In reply to Farumir [2014-02-02 22:19:44 +0000 UTC]

Time management. XP

"Skill maybe, time-management definitely not. "

Hehe~

πŸ‘: 0 ⏩: 1

Farumir In reply to illo-inc [2014-02-03 20:57:15 +0000 UTC]

Hey that's my quote, no using my own quotes against me. lol

πŸ‘: 0 ⏩: 0

illo-inc In reply to illo-inc [2014-02-02 21:42:53 +0000 UTC]

But it does look amazing ^^

πŸ‘: 0 ⏩: 0

theWolfdragon21 [2014-02-02 20:22:16 +0000 UTC]

holy shit this is cool!! its almost done!

πŸ‘: 0 ⏩: 1

Farumir In reply to theWolfdragon21 [2014-02-02 20:29:50 +0000 UTC]

Thanks, and it's passed the wear-test so I'll be selling mask-blanks as soon as I get a new stock of resin (run out again).

πŸ‘: 0 ⏩: 1

theWolfdragon21 In reply to Farumir [2014-02-02 20:40:35 +0000 UTC]

i see ^^ good luck it looks awesome!!

πŸ‘: 0 ⏩: 0