HOME | DD

Description

(A1) Soul Core:
The Soul Core is considered the brain of the animatronic, it contains 7 key components to the device that can be listed down below.
(A2) Voice-o-phone:
This is the component that is used as the vocal cords of the animatronic, this speaker is used to allow the animatronic to talk and has over 50+ languages installed into its system. Keep in mind that the default setting is English.
(A3) Hunger Meeter: {Clarence Accepted}
The hunger meeter acts as a dial and set timer to indicate when the animatronic will be hungry, how hungry it is, and its level of fuel that the animatronic needs.
(A4) Cognitohazard Disks: {Clarence Accepted}
These disks are used to alter the perception and mentality of all patrons to avoid lawsuits, and continue with our operation.
(A5) Ice Fans:
These fans are part of the temperature regulation set that comes int two pairs. These fans are to cool down the animatronic to prevent overheating. The cooling is spread through the animatronic as the metallic plates have been designed as an open air system.
(A6) Magma Heaters:
These fans are part of the temperature regulation set that comes int two pairs.
These Heaters are to keep Wendy at a consistent temperature of 98.6°F (37°C) to give the animatronic a soft warm feeling. The heating is spread through the animatronic as the metallic plates have been designed as an open air system.
(A7) Happy Hand:
This device is used to interact with patron’s Wendy Watches for activities collectibles, and tickets. This palm also lights up depending on either scenario or emotion
(A8) Candy Dispenser:
This dispenser uses pocket dimension technology to dispense a finite amount of candy that can be refilled any time in the employee storage closet. This is to be filled with Wrapped candy of multiple flavors.
(A9) Detectors: {Clarence Accepted}
These detectors are used as a spirit measurement tool that is used to detect which target has the most amount of spirit energy to be extracted from. This device will also be used to collect data of patrons Souls.
(A10) Confetti Popper:
This is a simplistic mechanical popper that can shoot out confetti when Wendy forms her hand in a gun-like position and pretends to fire her popper, causing multi-colored confetti to spread out. Using pocket dimension technology it can be refilled in the canister in the employee storage closet.
(A11) Face Painter:
This little device is used as a brush to paint patrons faces, draw on objects or paper, or sign patrons items that are requested for signatures.
The brush can retract to clean and change colors in an instant. Using pocket dimension technology, the paint can be refilled using the multiple containers in the employee storage closet.
(A12) Balloon Maker:
This device is a helium pump attached to a balloon pump that can attach and instantly make balloons to be served on their own or shaped into different kinds of ballon art. Helium, strings, and balloon rubber are all stored using pocket dimension technology. Each can be refilled in the canisters in the storage closet.
(A13) Heart View: {Clarence Accepted}
This is a one way view that can let the target inside Wendy’s stomach to see the outside world. If an employee wants to see inside Wendy’s stomach, they have to look close into the Heart View.
(A14) Sensor Wires:
These wires come in three types and are surrounded in a protective metallic cylinder. Sensor wires, movement wires, and Soul power wires. Each of these wires work together to make the animatronic move properly and allow the animatronic to feel touch.
(A15) Jingle Bells:
These little bells are both on her Pigtails and feet, they mainly serve as cosmetic devices that rattle and jingle when Wendy walks.
(A16) Fluid Styles:
These devices are used to allow the animatronic to articulate and move her hair in a natural or expressive manner.
(A17) Sole Frame: {Clarence Accepted}
This device is not the brain, but it’s more of a neural translator to allow the soul to move and control the body of the animatronic it is also inhibitor for thought. It’s what keeps the animatronic under control and in its place to prevent the soul from rebelling for control.
(A18) Eye Show:
This device is a screen that comes with metallic eye lids. The devices come in two pairs. They light up and act as the eyes of the animatronic, they can change color and look to express emotions.
(A19) The Drums:
These devices are connected to the animatronic’s sole frame and allow sound to be translated to the soul core so the animatronic can hear.
(A20) Light Shows:
These are Multi Colored Rainbow disks that allow the animatronics Cheeks, Nose, Eyes, and Hand to light up in multiple different colors. They mostly change color depending on emotion or scenario.
(A21) Light Wires:
These wires are to sync up the light shows to make sure that all the lights on the face light up correctly together.
(A22) Orb Joints:
These joints are made with strong magnets and motors that allow the animatronics joints to move and articulate in multiple directions, some are more flexible than others.
(A23) Stroller Rollers:
These are retractable wheels that allow the animatronic to roller-skate, they can also be motorized if necessary.
(A24) Toe Weights:
These metallic toes are used to control weight. It also allow the animatronic to brake during roller skating.
(A25) Baby Steps:
These metallic square feet allow The Animatronic to stand walk, and move properly.

(B1) Dress Wireframe:
This is a metallic frame that’s used to keep the dress in place and in correct shape.
(B2) Dress Pockets:
Little pockets underneath the skirt the animatronic can access.
(B3) Exhaust Vents:
These vents are used to regulate excess heat by expelling it through the backside. There are 6 in total.

{Level 5 Clarence or Higher Required}
{Level 5 Clarence Accepted}

(C1) Pull Cylinders:
These Cylinders are designed to grip target prey and pull them down into the animatronics throat.
(C2) Mouth:
This is the entrance point in which targets will be captured and swallowed whole by the animatronic to begin spirit/soul extraction.
(C3) Esophagus:
This part is what allows the target to travel down the animatronic into the stomach.
(C4) Stomach:
The Animatronics stomach is lined with pink soft fabric that softens the barrier between flesh and spirit that is designed to be cozy. The stomach will be filled with colorless ball pit balls that act as a sponge to absorb spirit for the process. They also act as digestion of plastic toy foods the animatronic may consume.
(C5) Small intestines:
The small intestines are in seven parts that are small pocket dimensions of funhouses that absorb the spirit and put them into the ball pit balls. These balls will change color depending on soul color as well as what chamber they are in.
(C6) Large Intestines:
The large intestines are designed to pull out both the now multi colored ball pit balls and the target and or Caracas of the target from each designated pocket dimension in the small intestines. The large intestine will then pump the balls into the last chamber where they will be expelled into the animatronics diaper. If the target is diseased due to lack of spirit. Organic matter will be absorbed in the large intestine to be used as extra fuel for the animatronic. The soul will be expelled along with the collected spirit. If target is alive the large intestine will use the installed Cognitohazards to induce memory loss if the subject was unwilling.
(C7) Dump Tank:
The Spirit Energy and soul that has been collected from the target will be built up in this chamber in which it will expand until the chamber is at full capacity. The animatronic will then “release” the spirit energy ball pit balls and possible soul into her diaper. Staff teams and or Kidroid bots will then fallow protocol of extraction process.

(D1) Wire Tube:
This is where the wires are placed. The little holes around the tube allow the animatronic to feel touch all around the body.
(D2) Protective Metal:
This is used to keep the wires safe and act as an open air circulatory system to regulate heat.
(D3) Outer Pillow:
This is the outer layer of the animatronic that covers the Exoskeleton and makes the animatronic warm and soft to the touch
(D4) Wires
All three of the wires inside the Wire tube. Sensor wires, movement wires, and Soul power wires.

(E1) Eye Connectors:
The part of the eyes that connect to the wires.
(E2) Eye Screws:
The part of the eyes that allow the device to screw into the animatronic.
(E3) Eye Lock:
The part of the device the locks the eye into place and holds it in the right direction.
(E4) Micro Eyes:
These are microscopic cameras that work together to make a video feed that allows the animatronic to see. They are all lined on top of the eyes of the animatronic.

(F1) Empty Soul Core: {Clearance Accepted}
This is just the standard issue soul core without the other parts. These soul cores are in each and every animatronic with a collected soul used as an energy source and personality consciousness.

(G1) Wheel Space:
The Empty Space of the roller skate wheel that retracts in and out to aid in retracting in and out of the shoe
(G2) Wheel Bar:
The part of the wheel that allows the wheel to roll. This part is also motorized to allow the animatronic to gain a boost of speed.
(G3) Wheel Cavity:
This is the space that Retracts and allows the wheel to rest safely in the shoe.
(G4) Pressure Bar:
This is the part of the wheel that allows for height adjustment between the shoe and ground. This also retracts when going into the shoe of the Animatronic.

For more information please take a look at your Wendy’s Wonderful World Employee Manual.

Wendy BluePrint (No Lables)

Description

(A1) Soul Core:
The Soul Core is considered the brain of the animatronic, it contains 7 key components to the device that can be listed down below.
(A2) Voice-o-phone:
This is the component that is used as the vocal cords of the animatronic, this speaker is used to allow the animatronic to talk and has over 50+ languages installed into its system. Keep in mind that the default setting is English.
(A3) Hunger Meeter: {Clarence Accepted}
The hunger meeter acts as a dial and set timer to indicate when the animatronic will be hungry, how hungry it is, and its level of fuel that the animatronic needs.
(A4) Cognitohazard Disks: {Clarence Accepted}
These disks are used to alter the perception and mentality of all patrons to avoid lawsuits, and continue with our operation.
(A5) Ice Fans:
These fans are part of the temperature regulation set that comes int two pairs. These fans are to cool down the animatronic to prevent overheating. The cooling is spread through the animatronic as the metallic plates have been designed as an open air system.
(A6) Magma Heaters:
These fans are part of the temperature regulation set that comes int two pairs.
These Heaters are to keep Wendy at a consistent temperature of 98.6°F (37°C) to give the animatronic a soft warm feeling. The heating is spread through the animatronic as the metallic plates have been designed as an open air system.
(A7) Happy Hand:
This device is used to interact with patron’s Wendy Watches for activities collectibles, and tickets. This palm also lights up depending on either scenario or emotion
(A8) Candy Dispenser:
This dispenser uses pocket dimension technology to dispense a finite amount of candy that can be refilled any time in the employee storage closet. This is to be filled with Wrapped candy of multiple flavors.
(A9) Detectors: {Clarence Accepted}
These detectors are used as a spirit measurement tool that is used to detect which target has the most amount of spirit energy to be extracted from. This device will also be used to collect data of patrons Souls.
(A10) Confetti Popper:
This is a simplistic mechanical popper that can shoot out confetti when Wendy forms her hand in a gun-like position and pretends to fire her popper, causing multi-colored confetti to spread out. Using pocket dimension technology it can be refilled in the canister in the employee storage closet.
(A11) Face Painter:
This little device is used as a brush to paint patrons faces, draw on objects or paper, or sign patrons items that are requested for signatures.
The brush can retract to clean and change colors in an instant. Using pocket dimension technology, the paint can be refilled using the multiple containers in the employee storage closet.
(A12) Balloon Maker:
This device is a helium pump attached to a balloon pump that can attach and instantly make balloons to be served on their own or shaped into different kinds of ballon art. Helium, strings, and balloon rubber are all stored using pocket dimension technology. Each can be refilled in the canisters in the storage closet.
(A13) Heart View: {Clarence Accepted}
This is a one way view that can let the target inside Wendy’s stomach to see the outside world. If an employee wants to see inside Wendy’s stomach, they have to look close into the Heart View.
(A14) Sensor Wires:
These wires come in three types and are surrounded in a protective metallic cylinder. Sensor wires, movement wires, and Soul power wires. Each of these wires work together to make the animatronic move properly and allow the animatronic to feel touch.
(A15) Jingle Bells:
These little bells are both on her Pigtails and feet, they mainly serve as cosmetic devices that rattle and jingle when Wendy walks.
(A16) Fluid Styles:
These devices are used to allow the animatronic to articulate and move her hair in a natural or expressive manner.
(A17) Sole Frame: {Clarence Accepted}
This device is not the brain, but it’s more of a neural translator to allow the soul to move and control the body of the animatronic it is also inhibitor for thought. It’s what keeps the animatronic under control and in its place to prevent the soul from rebelling for control.
(A18) Eye Show:
This device is a screen that comes with metallic eye lids. The devices come in two pairs. They light up and act as the eyes of the animatronic, they can change color and look to express emotions.
(A19) The Drums:
These devices are connected to the animatronic’s sole frame and allow sound to be translated to the soul core so the animatronic can hear.
(A20) Light Shows:
These are Multi Colored Rainbow disks that allow the animatronics Cheeks, Nose, Eyes, and Hand to light up in multiple different colors. They mostly change color depending on emotion or scenario.
(A21) Light Wires:
These wires are to sync up the light shows to make sure that all the lights on the face light up correctly together.
(A22) Orb Joints:
These joints are made with strong magnets and motors that allow the animatronics joints to move and articulate in multiple directions, some are more flexible than others.
(A23) Stroller Rollers:
These are retractable wheels that allow the animatronic to roller-skate, they can also be motorized if necessary.
(A24) Toe Weights:
These metallic toes are used to control weight. It also allow the animatronic to brake during roller skating.
(A25) Baby Steps:
These metallic square feet allow The Animatronic to stand walk, and move properly.

(B1) Dress Wireframe:
This is a metallic frame that’s used to keep the dress in place and in correct shape.
(B2) Dress Pockets:
Little pockets underneath the skirt the animatronic can access.
(B3) Exhaust Vents:
These vents are used to regulate excess heat by expelling it through the backside. There are 6 in total.

{Level 5 Clarence or Higher Required}
{Level 5 Clarence Accepted}

(C1) Pull Cylinders:
These Cylinders are designed to grip target prey and pull them down into the animatronics throat.
(C2) Mouth:
This is the entrance point in which targets will be captured and swallowed whole by the animatronic to begin spirit/soul extraction.
(C3) Esophagus:
This part is what allows the target to travel down the animatronic into the stomach.
(C4) Stomach:
The Animatronics stomach is lined with pink soft fabric that softens the barrier between flesh and spirit that is designed to be cozy. The stomach will be filled with colorless ball pit balls that act as a sponge to absorb spirit for the process. They also act as digestion of plastic toy foods the animatronic may consume.
(C5) Small intestines:
The small intestines are in seven parts that are small pocket dimensions of funhouses that absorb the spirit and put them into the ball pit balls. These balls will change color depending on soul color as well as what chamber they are in.
(C6) Large Intestines:
The large intestines are designed to pull out both the now multi colored ball pit balls and the target and or Caracas of the target from each designated pocket dimension in the small intestines. The large intestine will then pump the balls into the last chamber where they will be expelled into the animatronics diaper. If the target is diseased due to lack of spirit. Organic matter will be absorbed in the large intestine to be used as extra fuel for the animatronic. The soul will be expelled along with the collected spirit. If target is alive the large intestine will use the installed Cognitohazards to induce memory loss if the subject was unwilling.
(C7) Dump Tank:
The Spirit Energy and soul that has been collected from the target will be built up in this chamber in which it will expand until the chamber is at full capacity. The animatronic will then “release” the spirit energy ball pit balls and possible soul into her diaper. Staff teams and or Kidroid bots will then fallow protocol of extraction process.

(D1) Wire Tube:
This is where the wires are placed. The little holes around the tube allow the animatronic to feel touch all around the body.
(D2) Protective Metal:
This is used to keep the wires safe and act as an open air circulatory system to regulate heat.
(D3) Outer Pillow:
This is the outer layer of the animatronic that covers the Exoskeleton and makes the animatronic warm and soft to the touch
(D4) Wires
All three of the wires inside the Wire tube. Sensor wires, movement wires, and Soul power wires.

(E1) Eye Connectors:
The part of the eyes that connect to the wires.
(E2) Eye Screws:
The part of the eyes that allow the device to screw into the animatronic.
(E3) Eye Lock:
The part of the device the locks the eye into place and holds it in the right direction.
(E4) Micro Eyes:
These are microscopic cameras that work together to make a video feed that allows the animatronic to see. They are all lined on top of the eyes of the animatronic.

(F1) Empty Soul Core: {Clearance Accepted}
This is just the standard issue soul core without the other parts. These soul cores are in each and every animatronic with a collected soul used as an energy source and personality consciousness.

(G1) Wheel Space:
The Empty Space of the roller skate wheel that retracts in and out to aid in retracting in and out of the shoe
(G2) Wheel Bar:
The part of the wheel that allows the wheel to roll. This part is also motorized to allow the animatronic to gain a boost of speed.
(G3) Wheel Cavity:
This is the space that Retracts and allows the wheel to rest safely in the shoe.
(G4) Pressure Bar:
This is the part of the wheel that allows for height adjustment between the shoe and ground. This also retracts when going into the shoe of the Animatronic.

For more information please take a look at your Wendy’s Wonderful World Employee Manual.

Wendy BluePrint (No Lables)