HOME | DD

Description
So I read Dangan Ronpa ( [link] ). And I love Monobear. He is the greatest. Seriously. So I really, really wanted to have a little Monobear to put in my room. But I couldn't find any good templates for one, so I made this one in paint! It's pretty simple, so it shouldn't take that much effort to fold. I hope my fellow Dangan Ronpa fans enjoy!

Instructions:

Body: Cut out around the shape; you should end up with one piece. Fold along the solid and dotted lines. The light grey tabs, once folded, should tuck into the figure (I reccomend waiting to secure them until all parts are folded). After doing so, you should have a box with ears sticking up. Set it aside.

Arms: Cut around the shape; once again, you should end up with a single piece. Now you will fold along the dotted line so that the two solid lines are showing on either side. You will want to stick the two sides together using glue or tape. Do this for both sides and set aside.

Legs: Same steps as the arms.

Putting it all together: I would reccomend putting the arms and legs onto the body before closing it. For the arms, you will fold along the dotted line. This should make an "L" shape. The short part of the L will be stuck to the sides of the body with glue or tape and the long part of the L freely hanging over it.. Then you attach the legs. Since they are on the bottom, all you have to do is stick them on by the short part created by the solid line. The solid line should not be visible. After that, you stick the tabs on the body to the inside, closing the box.

Now admire your work. I may create a Monomi (Dangan Ronpa 2) version in the future and share it, if anyone is interested. Good luck, and have fun! Upupupu~

Description
So I read Dangan Ronpa ( [link] ). And I love Monobear. He is the greatest. Seriously. So I really, really wanted to have a little Monobear to put in my room. But I couldn't find any good templates for one, so I made this one in paint! It's pretty simple, so it shouldn't take that much effort to fold. I hope my fellow Dangan Ronpa fans enjoy!

Instructions:

Body: Cut out around the shape; you should end up with one piece. Fold along the solid and dotted lines. The light grey tabs, once folded, should tuck into the figure (I reccomend waiting to secure them until all parts are folded). After doing so, you should have a box with ears sticking up. Set it aside.

Arms: Cut around the shape; once again, you should end up with a single piece. Now you will fold along the dotted line so that the two solid lines are showing on either side. You will want to stick the two sides together using glue or tape. Do this for both sides and set aside.

Legs: Same steps as the arms.

Putting it all together: I would reccomend putting the arms and legs onto the body before closing it. For the arms, you will fold along the dotted line. This should make an "L" shape. The short part of the L will be stuck to the sides of the body with glue or tape and the long part of the L freely hanging over it.. Then you attach the legs. Since they are on the bottom, all you have to do is stick them on by the short part created by the solid line. The solid line should not be visible. After that, you stick the tabs on the body to the inside, closing the box.

Now admire your work. I may create a Monomi (Dangan Ronpa 2) version in the future and share it, if anyone is interested. Good luck, and have fun! Upupupu~