HOME | DD

Description

The all-thread between the adapter and tripod head.

I made an adapter for my Bogen/Manfrotto #3025 tripod head today.

The threads on the base of the tripod head were 3/8”-20, where most of my tripods are 1/4”-20 thread. So I pulled out a piece of seasoned limb, cut from my cherry tree. First I turned it into a cylinder. Then I clamped it into a chuck, so I could drill the ends for the T-nuts. I pounded the T-nuts into each end, and only had a little crackage. I also cut a piece of brass 3/8”-20 all-thread to go from the adapter, into the tripod head. I finished the wood with a mineral oil and bees wax blend.

Description

The all-thread between the adapter and tripod head.

I made an adapter for my Bogen/Manfrotto #3025 tripod head today.

The threads on the base of the tripod head were 3/8”-20, where most of my tripods are 1/4”-20 thread. So I pulled out a piece of seasoned limb, cut from my cherry tree. First I turned it into a cylinder. Then I clamped it into a chuck, so I could drill the ends for the T-nuts. I pounded the T-nuts into each end, and only had a little crackage. I also cut a piece of brass 3/8”-20 all-thread to go from the adapter, into the tripod head. I finished the wood with a mineral oil and bees wax blend.