HOME | DD

Description
I had a RoughCut that I turned into a masterkey ( by cutting off the grip and adding a small panel over the opening it created on the rear ), and a broken a DoubleBreach; my plan for the masterkey didn't work out so I decided to mash the blasters together by grafting the DB's grip on the Roughcut and thus created a blaster with a much nicer grip than it had originally. CA glue, 2-part epoxy, Milliput, sanding, Montana 'Poison' spraypaint and a couple different grey Humbrol enamels- this is the end result. I like it

Description
I had a RoughCut that I turned into a masterkey ( by cutting off the grip and adding a small panel over the opening it created on the rear ), and a broken a DoubleBreach; my plan for the masterkey didn't work out so I decided to mash the blasters together by grafting the DB's grip on the Roughcut and thus created a blaster with a much nicer grip than it had originally. CA glue, 2-part epoxy, Milliput, sanding, Montana 'Poison' spraypaint and a couple different grey Humbrol enamels- this is the end result. I like it