HOME | DD
Texelion β Chloe Available on Shapeways
#boobs #chloe #cute #cutie #furry #sinclaire #skunk #jollyjack #3dprint #shapeways
Published: 2015-07-27 20:00:28 +0000 UTC; Views: 12539; Favourites: 149; Downloads: 195
Redirect to original
Description
FINALLY ! You can now buy one of those three versions of Chloe designed by and made by me.She's empty inside with a hole underneath so you can... put... stuff in it... NOT that kind of stuff, you pervert !
Other views :
Buy it there :Β www.shapeways.com/shops/manawoβ¦
May the Schwartz be with you !
EDIT : OK I see people are bashing the prices... just know that our cut on this is only $12, and we have to share it between us. The base printing price of the 15cm Chloe is already $125, you're paying the material volume and the guys who actually handle the printing. 3D printing is expensive, so please stop bashing.
Related content
Comments: 68
Well I don't sell the files of characters I don't own, Chloe belongs to Jollyjack. Besides it would just be a sculpt in Zbrush and the T-pose is incomplete since I do most of the work after posing, like a sculpture. Not a character you can use in Blender as is.
π: 0 β©: 1
Fine then, let me ask you something then within this manner. Your a 3D editor correct, or a 3D editor in general correct. If so I'd like to have a 3D game model if possible, but I don't see a game form at all. So I'll cut to the chase, do you do 3D ready format games at all, well source format. I can transfer nearly ant sort of game format to blender as is, but can you make it and could you give me the file to it. What am truly asking is, could you make me one or not. Its either a yes or a no
π: 0 β©: 1
Game models take a lot more time than simple sculpts, so I only do that for companies able to pay what it's worth and knowing exactly what they need in terms of design, polycount, topology, and textures. It would cost you a minimum of 1000 euros.
π: 0 β©: 0
You don't offer the file to print your own do you?Β
π: 0 β©: 1
If we give the files for anyone to print there is a risk they'll start printing and selling them for their own profit. It's not that I don't trust you in particular, but if we make an exception, everybody with a printer will start asking the same, and I'm pretty sure there will be one or two assholes in the bunch who don't care about intellectual property and copyrights.
π: 0 β©: 0
I want to buy the 15cm version at some point, but I'm a little confused to how they have it shown on the site. It shows the statue blank white in one of the previews along with a bunch of other random colors...does that size not come fully painted as designed or is that not the case and somethings just up with how it's shown on the site?
π: 0 β©: 1
Yeah they removed the full color version because they said the file was corrupted... I tried to contact them and they said they would check that, never heard of them again...
Scratch is on holiday but when he gets back we'll upload a new version. Let's hope it will not be "corrupted" this time.
π: 0 β©: 1
K, thank you. Will wait until then. Otherwise, I'll just settle for the second biggest size.
π: 0 β©: 0
Just got the print in the mail. Shapeways took a long time it to get printed, but I think it came out pretty good. I hope you collaborate with Jollyjack again one day.
π: 0 β©: 1
Cool, hope you got it in one piece.
π: 0 β©: 0
I ordered one of the 15 cm ones, and this morning I get an email from Shapeway saying something like, "Sorry, this is too fragile to print," and they refunded my money. This happen to anyone else? I want my cute desk skunky!
π: 0 β©: 1
Shapeways sucks, they told us they couldn't print it because "the file was corrupted". We sent them a new file.
π: 0 β©: 0
Awww I love her I would definitely buy her indeed she's sooo adorable!
π: 0 β©: 0
How much longer will this be available? This one really tempts me.
π: 0 β©: 1
It's very nice. Any chance of a Kat and Scarlet sculpt?
π: 0 β©: 1
So, let's see, on a cost per inch basis that works out at:
$13.98 per inch for the 2.7" model,
$14.98 per inch for the 4" model, and:
$22.99 per inch for the 6" model.Β
So, let's see, you're telling me, it costs only:
- $1.00 extra per inch, to scale up 148% from the 2.7" to the 4" model, an increase of 1.3", but
- $8.01 extra per inch, to scale up 150% from the 4" to the 6" model, an increase of 2", or
- $9.01 extra per inch, to scale up 222% from the 2" to the 6" model, an increase of 4"
So, on price, if:
- the 2.7" model @ $37.75 = 100% of the total cost of manufacture
- the 4" model @ $59.95 = $22.2 more than the 2.7" model, a whopping 158% increase in price [over the 2.7" model]
- the 6" model @ $137.95 = $100.2 more than the 2.7" model, a whopping 365% increase in price [over the 2.7" model] and an increase of $78.00 on the 4" model, still a whopping 230% increase in price from 4" to 6"...
And [let's face it] 6" is still tiny!
....Hmmm...
For an item with a void space in the middle and unacceptable levels of banding?
Based on these figures, I don't expect 3D printers to be commercially viable for at least another millennium...Β Three words: "injection moulded plastic".
And yes.Β I understand that the tooling costs are extreme to produce the required mould for IMP.
And yes.Β I think I will keep my money in my pocket until the price point reaches acceptable levels, say:
$1.00 for the 2.7" model,
$2.00 for the 4" model,
$5.00 for the 6" model,
$15.00 for a 1ft model,
$25.00 for a 2ft model.
$125.00 for a 6ft model.
π: 0 β©: 2
Are ou sick in the Brain ?
EDIT: It Shows Clearly you Know NOTHING about 3D Printing why you dont waste our Time and air here ?
Trolls are the best when they silent or dead ^^
π: 0 β©: 0
This shit doesn't even make any sense. If you don't want to buy it then STFU and GTFO, stop trying to justify... whatever you're trying to justify. If you want to calculate the price you need the volume, not the size, and between the 10cm and the 15cm, the actual volume of the print doubles, which also doubles the price.
I'm just not hiding this kind of message so people see how stupid you are...
π: 0 β©: 1
Please don't hide this message:
If I wanted to calculate the price per volume, volumetric information is required.Β Information I DO NOT HAVE! DUH.
Also, as no one understands volume, it is an essentially meaningless comparison... ...especially if the void space does not correspond proportionally to the height.Β Is the wall thickness the same throughout?
However, people do understand height more readily, therefore a better comparison is made.
Put short, your products are a FRO!
Great customer service BTW: 'STFU' 'GTFO'.Β
Now stick that up your millennium falcon and smoke it!
π: 0 β©: 1
You're not a customer... so GTFO.
π: 0 β©: 0
I am having a hard time choosing which size to get.
π: 0 β©: 0
Ordered an6in Version, i am exited to see her soon here ^^
Great work you made there !!
π: 0 β©: 0
lovely piece of whatever character this - though I;m extremely upset for you and the bashing of your prices. Β I do 3d printing too from my own Zbrush sculpts so it irks my life to see people comment on prices like this without doing any research first in to how much it actually costs for things like this. Β s3.amazonaws.com/rapgenius/tumβ¦
π: 0 β©: 1
People are so stupid, brag about Prices when they know not 1 % about 3d Printing << Got alot 3D Prints By now and thats far the cheapest i got..
π: 0 β©: 1
Indeed! They don't consider the time that's put into each model for quality and then the price to actually print it.
π: 0 β©: 0
I must have a teensy Chloe to go next to my teensy Colossus,and my Draenei Mage from FigurePrints! Excellent work capturing her cuteness!
π: 0 β©: 2
Nevermind, I watched the videos. Plastic compound. Looks so good.
π: 0 β©: 0
Wow those FigurePrints look awesome, are they done in sandstone too ? How high are they ? Looks really thin and detailed.
π: 0 β©: 1
Yes, they are sandstone, but those that they make now are far more detailed than my lowly Mage is. She was made with the old World of Warcraft in-game model as a base, so she's pretty, but sort of generic. The new ones, however, look a lot nicer. I wish I would have waited. 
π: 0 β©: 1
Cool thanks for the info. I wish they could print our stuff. Too much trouble with shapeways...
π: 0 β©: 0
If I ever come across some large amounts of money I want the 6 in. one!
π: 0 β©: 0
I'm totally chill with the price, I like the fact you have different sizes and prices. Looks sweet! getting one on my next payday <3 thanks for all your hardwork!
π: 0 β©: 0
I want one and I know they are expensive but worth it to have my own Chloe, but I have other things I have to pay for. But curiously how long do you think you will be selling these?
π: 0 β©: 1
I don't know, it depends on Shapeways sandstone stocks I guess ^^. I think you got time.
π: 0 β©: 0
Wait, is it only colored like this when ordered in sandstone?
π: 0 β©: 2
Sandstone is currently the only material that Shapeways can print in full color. They are doing a pilot program with a full-color plastic material, but that's only available to their 'Pilot Program' members, the surface texture isn't as good, and the material cost is four times what the sandstone material is -- which would make the 4" figure cost about $250.
There are always tradeoffs. The basic plastic material is about a third the volume cost -- a ballpark guess is about $50 for the large figure without changing anything, although the material can have thinner walls; at half the thickness, the material cost for the figure would be about $25, although it would be less sturdy -- but what you'd get would be a white plastic figure that you'd have to paint yourself. It may be a viable tradeoff for people that have experience with painting figures (the market for figures from scale miniatures up through large vinyl figure kits shows that), but probably wouldn't be a good fit for most people.
π: 0 β©: 0
You can see the fullcolor sandstone printed figure on Jollyjack's gallery, he took some photos.
π: 0 β©: 1
Does the price include shipping/handling? Or is that another price altogether?
π: 0 β©: 1
Handling yes, but shipping will depend on your country.
π: 0 β©: 1
I've seen large figures and statuettes for that price range, so I understand.
π: 0 β©: 0
Wow. Before even reading your comment I said aloud regarding the price, "That's not bad!"
People, if you don't understand the cost of production on a limited item like this, just...learn.
π: 0 β©: 0
I agree, I would completely understand if it were 200$.
π: 0 β©: 0
I don't know if people even really look or buy figures often, but your prices seem standard to me. Especially for a select item like this.
I"ll probably be one of those a-holes who'll buy this when they are almost gone though. Cause I'm a procrastinator that way.
π: 0 β©: 1
| Next =>