HOME | DD

Description
So this is my entry, inspired by the gameboy colour and the floortile pattern in my church hall.

I chose to work with the gameboy colour because this was my first foray into the wold of 8bit, and so many fond memories come from playing Pokémon Blue. I chose to use my brother's gameboy as a reference, because I'm not sure the semitransparent purple of my own would work well in this format.

There are two printed surfaces here, front and sleeve. I have six colours in this, including three shades of that nice blue/turquoise, and the red is the tiny power light beside the screen. The dA logo on the from at the bottom is not wonky, its supposed to follow the bottom edge of the hoodie. This can be omitted however as it already carries the much larger logo on the sleeve. Also, the black dots in the bottom right of the gameboy itself may also be removed to facilitate easier printing.

I have the original .psd files of both the gameboy and the proposal, so colours and layouts can easily be changed.

Don't forget to veiw full size ;D

EDIT
I've had a few questions about copyright. Specifically about the shape of the console itself. The logos are copyrighted, which is why I've left them out. I cant find any evidence to say that the shape of the device itself is. You do see cars and electrical stuff in TV shows with a bit of black tape over the logo or something. I'm hoping its the same thing...

Description
So this is my entry, inspired by the gameboy colour and the floortile pattern in my church hall.

I chose to work with the gameboy colour because this was my first foray into the wold of 8bit, and so many fond memories come from playing Pokémon Blue. I chose to use my brother's gameboy as a reference, because I'm not sure the semitransparent purple of my own would work well in this format.

There are two printed surfaces here, front and sleeve. I have six colours in this, including three shades of that nice blue/turquoise, and the red is the tiny power light beside the screen. The dA logo on the from at the bottom is not wonky, its supposed to follow the bottom edge of the hoodie. This can be omitted however as it already carries the much larger logo on the sleeve. Also, the black dots in the bottom right of the gameboy itself may also be removed to facilitate easier printing.

I have the original .psd files of both the gameboy and the proposal, so colours and layouts can easily be changed.

Don't forget to veiw full size ;D

EDIT
I've had a few questions about copyright. Specifically about the shape of the console itself. The logos are copyrighted, which is why I've left them out. I cant find any evidence to say that the shape of the device itself is. You do see cars and electrical stuff in TV shows with a bit of black tape over the logo or something. I'm hoping its the same thing...