Comments: 54
Wataru12012 In reply to ??? [2014-11-03 12:31:47 +0000 UTC]
thank you~ β₯
π: 0 β©: 0
littlebigapprentice [2014-03-25 01:09:31 +0000 UTC]
Thanks this helped a lot. But I do have one question: could you explain how you hollowed the ball? Please I tried to but it kept changing shape and I couldn't do it.Β
π: 0 β©: 1
Wataru12012 In reply to littlebigapprentice [2014-03-25 18:11:09 +0000 UTC]
It was difficult to do, but what I did was I flattened the clay and started to make it round as well as i could. Then when it was relatively round with an opening in the front, I started the detail in the front. What you are trying to do is to flatten it so when you round it out with will already be hollow. I wouldn't try to make a solid ball and then try to hollow it out.
This is weird, but one of the things you could do to make it easier is to get something out of those small machines at things like supermarkets. The small things that come in bubbles like this (www.gumball.com/images/product⦠then you can use the capsule! Just cut it with sissors to make it shorter (it would be too long if you didn't) and then form the clay around it~ But you would have to remember to poke a hole at the top so you can attach the wire for the jewel and the necklace chain!~
I hope this helped! If not please feel free to ask me~ :3
π: 0 β©: 0
HunterSerenity [2014-02-23 22:14:29 +0000 UTC]
How did you put on the jewel? Did you do it after spray paint
π: 0 β©: 1
Wataru12012 In reply to HunterSerenity [2014-02-25 03:37:34 +0000 UTC]
I put it on a clear string, then you poke a hole in the top if the necklace so you can string it through After you spray paint it. The jewel is one of the last things to add. You just put a little bit of hot glue in the hole you poked earlier and string the clear string through and let it cool off. Then your done! Hope that helps~~
π: 0 β©: 1
HunterSerenity In reply to Wataru12012 [2014-03-01 16:59:03 +0000 UTC]
Thank you so much! I could. Not find any explanation for this and I finally found one!!! Thank you!!!
π: 0 β©: 1
HunterSerenity In reply to Wataru12012 [2014-03-22 03:20:16 +0000 UTC]
And I am so sorry to bother you with all the questions, but if the pieces were dry, how did you attach them together?
π: 0 β©: 1
Wataru12012 In reply to HunterSerenity [2014-03-27 14:32:21 +0000 UTC]
yeah it takes a while to dry x__x Another alternative to model magic is sculpey if you dont like waiting for it to dry.
Im glad that it helps and cant wait to see it~~
π: 0 β©: 0
chuawesomeness In reply to Wataru12012 [2013-02-12 22:48:17 +0000 UTC]
Yeah..
It's just that I have no space and no money..
π: 0 β©: 1
chuawesomeness In reply to Wataru12012 [2013-02-13 00:13:37 +0000 UTC]
Yeaaaaaa.....
Maybe in the future.. If I remember!
π: 0 β©: 0
Moonlight-Requiem [2013-01-17 14:05:57 +0000 UTC]
Also what glue did you use? ^_^ Mine doesnt appear to be sticking
π: 0 β©: 1
Wataru12012 In reply to Moonlight-Requiem [2013-01-18 20:19:18 +0000 UTC]
Awwww Your Welcome!!!
I made all the rings individually and just made it look like they were one continuous ring/swirl.
π: 0 β©: 0
SimplyAreios [2012-10-27 03:40:48 +0000 UTC]
Thanks alot for this tutorial :3 (Either make my own or buy it on ebay for $250 - no thanks!)
I don't understand the point of the clear string though, or how do attach the ring/how to attach the chain.
π: 0 β©: 1
Wataru12012 In reply to SimplyAreios [2012-10-27 08:17:06 +0000 UTC]
β₯ The clear string went through the crystal in the middle to make it look like it was floating in there (With some going through the top of the necklace)
β₯ The ring is attached in 2 ways. 1) just hot glue it on OR 2) slide it down after the chain is done.
β₯ The chain is attached by the extra clear string that you left sticking out of the top of the necklace. (sorry I should have showed that more clearly!)To make it sturdier you can put a little hot glue there too!
Hope this helps!
π: 0 β©: 1
Cloudoholic22 [2012-10-03 14:01:46 +0000 UTC]
Thanks so much for doing this, had really no idea where to start with her necklace but now I do
π: 0 β©: 1
Wataru12012 In reply to Cloudoholic22 [2012-10-04 20:42:23 +0000 UTC]
your welcome! Im glad that it helped! β₯
π: 0 β©: 0
mewakari13 [2012-07-02 14:59:22 +0000 UTC]
I'm looking forward to trying this, thank you!
Is there any sort of paint, gel, or liquid/spray substance that may give it a shiny look?
π: 0 β©: 1
BlueEyedJuniper [2012-06-28 22:35:38 +0000 UTC]
Thank you OwO; I've been looking everywhere for a tutorial :'D
π: 0 β©: 1
ladylucienne [2012-06-28 20:46:22 +0000 UTC]
Thanks for this! I will try it ^^
π: 0 β©: 1
Wataru12012 In reply to ladylucienne [2012-06-29 08:00:14 +0000 UTC]
Your welcome~ I hope it turns out!
π: 0 β©: 0
youfie [2012-03-11 18:16:21 +0000 UTC]
Thank you very much for this useful tutorial! Just a question: how many time does it take to make it please? ^^
π: 0 β©: 1
Wataru12012 In reply to youfie [2012-03-12 15:15:48 +0000 UTC]
Aww Your Welcome~β₯
Well what I did was
Day 1:
Mold it (2-3 hours give or take) then paint with Gesso or white paint
Then let dry over night (so it can harden and become strong enought to hold on its own)
Day 2:
Spray paint silver and let dry (1-2 hours depending on type of paint you get)
then put everything together (ring, jewel, chain) and that took maybe 5-10 mins
π: 0 β©: 1
youfie In reply to Wataru12012 [2012-03-12 16:40:42 +0000 UTC]
Thank you very much for your quick reply, and for those precious information!
π: 0 β©: 1
Wataru12012 In reply to ninjaneko93 [2012-02-27 16:38:08 +0000 UTC]
Your Welcome~ I hope it helps!
π: 0 β©: 0
SetoKenshin [2011-10-27 23:27:49 +0000 UTC]
THANK YOU SO MUCH
π: 0 β©: 0
Endless-Fantasy-Art [2011-09-07 01:19:17 +0000 UTC]
Thank you for making this 8D
I'm planning on making a necklace for my Serah cosplay. This is really going to help
π: 0 β©: 1
| Next =>