Comments: 120
Nightshadow132 [2016-02-13 15:02:59 +0000 UTC]
You're cool) Thank you)
And you can make a model Warface?
👍: 0 ⏩: 0
Avrin-ART In reply to Isildra [2014-11-25 00:45:55 +0000 UTC]
And thank you for the compliments and for building!
Tali's legs are in a stepping position so it's not that stable by default. But yes joining legs together is always a difficult part, especially the way the front 'skirt' gets in the way. In, uh that whole area try to make sure the parts are carefully curved around so the tabs meet their specific edges as neatly as possible. I sometimes find the legs move apart when building, so I take a long strip of paper, fold it into a U shape and glue it inside the model, so it wraps tightly up one leg, up and over down into the other to hold them closer through tension of the paper.
Mine was printed on an Epsom P50 inkjet (back when it used to work ). My models have somewhat poor colours in real life, they look brighter here because of the camera flash. It wasn't until I got a Brother printer this year that I could get some nice saturation, but apart from my BioShock SMG and 3DS Sheik I don't have any big figures to demonstrate the difference with...yet. Anyway, yes laser printers can have issues with cracking or peeling ink, or toner rather. So really an inkjet is the best choice in the long term if you are going to take up the hobby.
👍: 0 ⏩: 0
butthurttoast [2014-05-15 17:01:07 +0000 UTC]
'Sees for the first time'- "Oh, cool action figure!"
'Takes a second look'-...Wait a second...that's paper.....MOTHER OF GOD... ITS AMAZING!!!!!
👍: 0 ⏩: 1
Tielestr [2014-04-27 20:09:57 +0000 UTC]
Almost done!
👍: 0 ⏩: 1
GethEngineer [2013-12-08 06:44:36 +0000 UTC]
We reach consensus:this is awesome!
We will build it on crhistmas holiday.
We will also build Vakarian.
👍: 0 ⏩: 0
Senram [2013-07-20 22:24:01 +0000 UTC]
So much awesome!
👍: 0 ⏩: 0
Ambris [2013-07-01 00:07:24 +0000 UTC]
OMG.
That is some amazing papercraft.
👍: 0 ⏩: 1
Avrin-ART In reply to Ambris [2013-07-01 17:56:20 +0000 UTC]
Thanks!
👍: 0 ⏩: 0
Avrin-ART In reply to Maldrad [2013-02-05 22:52:28 +0000 UTC]
Thanks a lot! And good luck, if you have any questions just ask!
Yes anything between that range should be suitable; personally I use 160gsm paper as it's a good balance between strength and flexibility. 120gsm gets flimsy but some people work fine with it, whilst 200gsm makes very solid models but with very thick edges between parts. All my templates are in A4 size by default.
👍: 0 ⏩: 1
Sengrath [2012-10-02 11:46:22 +0000 UTC]
Excelent work ! can you tell me what kind of glue do you work with ? solid paper stick glue or liquid ( drops or something)?
👍: 0 ⏩: 1
Avrin-ART In reply to Sengrath [2012-10-02 16:06:37 +0000 UTC]
Thank you, I use pretty ordinary PVA glue for everything- cheap and effective! Avoid solid glue sticks though. I know they're meant for paper but for models they have very little sticking power.
👍: 0 ⏩: 0
memoryman15 [2012-09-24 10:20:13 +0000 UTC]
I'm definitely going to try to make this and the Garrus models, so awesome!
👍: 0 ⏩: 1
Avrin-ART In reply to arc5555 [2012-08-22 09:52:29 +0000 UTC]
Thanks, yeah she's the 'easiest' out of the big ones, or at least seems that way after Garrus and Shep!
👍: 0 ⏩: 0
Alieny1 [2012-08-01 23:11:10 +0000 UTC]
I'm going to start making Tali, but I just wanted to know if you could use Glue Guns? I really don't want to mess her up.
👍: 0 ⏩: 1
Metmann [2012-07-19 14:16:56 +0000 UTC]
Ive started yesterday and im a bit unsure, so im asking: what sort of gtlue do you use? cause a regular glue stick doesnt work too well...
Your papercrafts are amazing, have you thought about making one of javik the prothean?
👍: 0 ⏩: 1
tomoraider [2012-07-15 14:08:52 +0000 UTC]
I have started building this last week, and I only have her right arm and head left to finish! And do you think the gun from Mordin's papercraft would look good with Tali? I was thinking of glueing it on her right arm.
And I must say, your instructions and PDO files were really useful. I was once working on a much simpler papercraft but it took me weeks to do it because I had no instructions, and I am working on this one really faster. The only part with whom I had problems were fingers.
👍: 0 ⏩: 1
Avrin-ART In reply to tomoraider [2012-07-15 15:27:25 +0000 UTC]
Thanks a lot for building the model! I'm glad to hear the instructions helped too since they often feel strange to me reading them back after I've already built it. Yes fingers are a real pain! More so on Liara/Shep since they have 5 smaller ones!
Actually I built the Predator pistol way before Tali as a test. She was meant to hold it but I didn't think the hands were posed right. Oddly mine holds Liara's Tempest SMG better due to its flatter handle. If you want the pistol to fit better, try to stick the thumb on in a more 'open' position.
👍: 0 ⏩: 2
tomoraider In reply to Avrin-ART [2012-08-03 10:33:36 +0000 UTC]
Hey, I just wanted to say I finished making Tali! I had some problems with her hood, so it looks a bit ugly where you glue those two circular bits on the front. And her left hand is in a bit different position than it's supposed to be, but it actually even looks better now! And there are some parts that look a bit ugly due to the glue I used, but all in all, I'm pretty satisfied with how it turned out. I still got the extras to add.
I'm not sure which model to do next, I can't choose between Garrus and Shepard. Which do you think is harder?
👍: 0 ⏩: 1
Avrin-ART In reply to tomoraider [2012-08-03 18:09:05 +0000 UTC]
Good to hear, I'd imagine problems like that might be reduced with practice, though admittedly the way I designed the hood to fit on is a bit risky.
Tough choice! I know I listed Garrus as slightly harder, but Shepard has more smaller details since I for some reason insisted on keeping a lot of fine edges on the armour. Garrus' head is definitely something to watch out for but he's got bigger pieces overall for everything else.
👍: 0 ⏩: 1
tomoraider In reply to Avrin-ART [2012-08-03 18:23:33 +0000 UTC]
Yeah, Tali was my second papercraft, but you can basically say it's first since I did the other a year or two ago.
And yeah, when I was looking at Garrus' PDO files, most of the parts were pretty big. I'm pretty sure I'll do Garrus, but it looks a lot harder due to the fact that he has double more parts than Tali!
👍: 0 ⏩: 0
tomoraider In reply to Avrin-ART [2012-07-15 16:03:58 +0000 UTC]
Ah, okay, thanks for suggestion ^^
👍: 0 ⏩: 0
Tielestr [2012-04-03 20:04:02 +0000 UTC]
I made only one papercraft model in my life - ship "Slave-1" from SW (2 copies).
But i wanna try to make this one. Because i really love Tali ^^
👍: 0 ⏩: 0
Huttuska [2012-03-05 19:05:27 +0000 UTC]
I am done with first leg, using 160grm paper. I have 1 problem, the print paint wears little bit off by fingers... any tips`?
Awesome work btw! ^^
👍: 0 ⏩: 1
RickF7666 [2011-11-16 04:39:20 +0000 UTC]
You sir are a genius. I haven't done any papercraft since I was a child, but I have got to give this a try.
👍: 0 ⏩: 1
Avrin-ART In reply to RickF7666 [2011-11-16 20:33:38 +0000 UTC]
Haha thanks, Tali is probably the easiest of the 4 (well except the hands and chin section of the helmet) though a little practice on something simpler first could be a good idea.
👍: 0 ⏩: 0
| Next =>