HOME | DD

ken1171 — -Drossel Rigging Comish-

Published: 2012-01-07 05:06:22 +0000 UTC; Views: 7229; Favourites: 173; Downloads: 0
Redirect to original
Description ~Drossel Rigging Comish~

A figure I have been rigging for a commission in the last couple of days. Poor model was in pretty bad shape, with all sorts of broken geometry, messed up materials, and crooked joints. The hands were so bad I had to remodel them. I thought I would spend the whole weekend on this, but it comes down the Poser Pro 2012 "Setup Room" was quite stable and didn't crash a single time. I have also added IK chains to the legs, arms, and to two the head extensions.

Still have some work to do on the geometry, but she's already posing well by now. I wasn't told who modeled it. Hope you like it and thanks for coming by!
Related content

ken1171 - -Drossel Walks-

ken1171 - -Red Drossel Von Flugel-

ken1171 - -Sexy Satsuki Doll-

ken1171 - -Animal Chibi Fluff-

ken1171 - -Collab with Jayjaykirby-

ken1171 - -Neko Dance-

ken1171 - -Chibi Goth and Axe-

ken1171 - -Neko Team-

ken1171 - -Future Gear-

Testament77 - Chogokin Drossel - 02

celsoryuji - XJ-9 II wip15

Mako-chan89 - Drossel von Fluegel

lupesisagundam - figma Drossel

SkullSch00l - Figma #38 Drossel

yukihana5 - Chogokin Drossel

Tformer - Drossel 8

cyberiatem - Drossel model

LittleMissSkuld - Introducing...Drossel
Comments: 95

ken1171 In reply to ??? [2015-08-07 22:26:49 +0000 UTC]

In this one I was commissioned to create the character rigging, so it could be posed and animated. I actually don't know who modeled it.

👍: 0 ⏩: 0

MarcosBnPinto [2012-09-28 22:11:26 +0000 UTC]

Lovely poses, by the way!

👍: 0 ⏩: 1

ken1171 In reply to MarcosBnPinto [2012-09-29 02:05:18 +0000 UTC]

Thanks, it was fun to pose Drossel when the rigging was finished. ^______^

👍: 0 ⏩: 0

MarcosBnPinto [2012-09-28 22:11:05 +0000 UTC]

so it was you who rigged her! Thanks so muc for your hard work!

👍: 0 ⏩: 1

ken1171 In reply to MarcosBnPinto [2012-09-29 02:04:50 +0000 UTC]

You're welcome! I did it for a paid commission.

👍: 0 ⏩: 0

odessa1952 [2012-03-28 01:51:52 +0000 UTC]

good job !!

👍: 0 ⏩: 1

ken1171 In reply to odessa1952 [2012-03-28 11:13:04 +0000 UTC]

Thank you! It's a pleasure to see rigid statues to start moving. ^^

👍: 0 ⏩: 0

elianeck [2012-01-20 16:12:43 +0000 UTC]

ohh my love that model!!!!!

👍: 0 ⏩: 1

ken1171 In reply to elianeck [2012-01-20 18:17:31 +0000 UTC]

Hehe it was fun to rig!

👍: 0 ⏩: 0

TheRamosOnline [2012-01-13 01:08:12 +0000 UTC]

A shame that this wont be released for Poser, even as a freebie :<

👍: 0 ⏩: 1

ken1171 In reply to TheRamosOnline [2012-01-13 09:21:10 +0000 UTC]

I don't know if it will or not - it's not my model. I am just doing my part in this commission. ^^

👍: 0 ⏩: 0

DeadCobra [2012-01-10 20:54:25 +0000 UTC]

Nice

👍: 0 ⏩: 1

ken1171 In reply to DeadCobra [2012-01-10 21:10:46 +0000 UTC]

Thank you!

👍: 0 ⏩: 0

Leycuervo [2012-01-09 02:58:16 +0000 UTC]

Was this given to you as an OBJ...?

By the way it looks awesome man, good job!

👍: 0 ⏩: 1

ken1171 In reply to Leycuervo [2012-01-09 09:38:11 +0000 UTC]

Thank you! They attempted to use Auto-Rig but that basically destroyed the model. Then I was commissioned to have it fixed. ^^

👍: 0 ⏩: 1

Leycuervo In reply to ken1171 [2012-01-09 13:59:37 +0000 UTC]

Well you did an awesome job man!

Can you rig an obj?

👍: 0 ⏩: 1

ken1171 In reply to Leycuervo [2012-01-09 21:08:47 +0000 UTC]

Well, of course - all Poser figures are OBJs.

👍: 0 ⏩: 1

Leycuervo In reply to ken1171 [2012-01-10 02:32:27 +0000 UTC]

Well my question is if one can make a pose able 3d model from an obj file...? :S

👍: 0 ⏩: 1

ken1171 In reply to Leycuervo [2012-01-10 09:33:33 +0000 UTC]

Yes you can. That is called "character setup", or just "rigging".

👍: 0 ⏩: 1

Leycuervo In reply to ken1171 [2012-01-10 14:58:59 +0000 UTC]

And how much you charge for that!?

Thanks for the info!

👍: 0 ⏩: 1

ken1171 In reply to Leycuervo [2012-01-10 21:12:29 +0000 UTC]

Send me a note with the details, and we can discuss the commission price.

👍: 0 ⏩: 1

Leycuervo In reply to ken1171 [2012-01-11 03:33:56 +0000 UTC]

Ok

👍: 0 ⏩: 0

elianeck [2012-01-09 02:45:01 +0000 UTC]

love that!

👍: 0 ⏩: 1

ken1171 In reply to elianeck [2012-01-09 09:35:01 +0000 UTC]

Thank you! ^^

👍: 0 ⏩: 0

peterandwendy [2012-01-08 12:29:04 +0000 UTC]

Aaw so cute

👍: 0 ⏩: 1

ken1171 In reply to peterandwendy [2012-01-08 13:58:08 +0000 UTC]

Thank you! ^_____^

👍: 0 ⏩: 1

peterandwendy In reply to ken1171 [2012-01-08 16:28:41 +0000 UTC]

^^

👍: 0 ⏩: 0

DarksealStudios [2012-01-07 23:10:05 +0000 UTC]

nice!!

👍: 0 ⏩: 1

ken1171 In reply to DarksealStudios [2012-01-08 06:41:21 +0000 UTC]

Thank you! It was tough but the character is fun to work with. ^^

👍: 0 ⏩: 1

DarksealStudios In reply to ken1171 [2012-01-09 06:37:27 +0000 UTC]

robots always seem to be a fav for me to work on... since i delete the twistx,y,z anyway!!!

👍: 0 ⏩: 1

ken1171 In reply to DarksealStudios [2012-01-09 09:24:21 +0000 UTC]

Well, some joints need the twist dial, especially on robots. ^^

👍: 0 ⏩: 1

DarksealStudios In reply to ken1171 [2012-01-10 04:12:01 +0000 UTC]

no, no... not the twist dial... the twistx head to twistx eye for example... editing in the cr2, making sure the bends don't effect each other... I would rather do that then to adjust falloffs. Alls I was say'n.

👍: 0 ⏩: 1

ken1171 In reply to DarksealStudios [2012-01-10 09:32:09 +0000 UTC]

But robots don't have falloffs...

👍: 0 ⏩: 1

DarksealStudios In reply to ken1171 [2012-01-10 20:12:28 +0000 UTC]

exactly!!

👍: 0 ⏩: 0

rodrigosantana3d [2012-01-07 18:09:34 +0000 UTC]

Amazing job, just try to play more with the textures, maybe apply some rusty or scrath..

👍: 0 ⏩: 1

ken1171 In reply to rodrigosantana3d [2012-01-07 18:11:19 +0000 UTC]

Thank you! This is a paid commission to do the character rigging for Poser.

👍: 0 ⏩: 0

ISIKOL [2012-01-07 17:33:12 +0000 UTC]

AMAZING MAN!!!

👍: 0 ⏩: 1

ken1171 In reply to ISIKOL [2012-01-07 18:07:18 +0000 UTC]

Thank you! Will be posting a little Drossel animation today, to test the rigging. If something is not right, it will always show in animations. ^^

👍: 0 ⏩: 0

BishounenTaurus [2012-01-07 16:00:30 +0000 UTC]

Do you plan to release this publicly?

👍: 0 ⏩: 1

ken1171 In reply to BishounenTaurus [2012-01-07 18:06:18 +0000 UTC]

Well, it's not my model, so I don't know. I am just doing the Poser rigging for a paid commission.

👍: 0 ⏩: 0

Jim-Zombie [2012-01-07 14:46:44 +0000 UTC]

Looks like you did some good work - sounds like it was a battle!

👍: 0 ⏩: 1

ken1171 In reply to Jim-Zombie [2012-01-07 18:05:33 +0000 UTC]

Thank you! I didn't realize the extend of the work until I saw the model in 3DSMAX. But now I have finally finished fixing all the kinks, and will be posting a little Drossel animation today.

👍: 0 ⏩: 0

Fusecoma [2012-01-07 14:17:48 +0000 UTC]

Great job on rigging so far. If you hadn't said that there were some geometry issues, I wouldn't have guessed. Is there anything you can't do well in this area?

Thanks for sharing your work & inspiring me to do something with robots today.

👍: 0 ⏩: 1

ken1171 In reply to Fusecoma [2012-01-07 18:04:17 +0000 UTC]

I would really like to model a human figure, but in the end I always chicken out.

👍: 0 ⏩: 1

Fusecoma In reply to ken1171 [2012-01-08 04:09:57 +0000 UTC]

That's funny...chickening out is what I always do as well.

I bet you could pull it off, though. You have amazing skills & put them to good use. I look forward to seeing the human you model! Well...human...catgirl...whatever.

👍: 0 ⏩: 1

ken1171 In reply to Fusecoma [2012-01-08 06:42:40 +0000 UTC]

Thanks! So far I only modeled bunny people.

👍: 0 ⏩: 0

OhJolly [2012-01-07 11:47:26 +0000 UTC]

I really like this figure, some time ago I have used it to learn better how to draw the joints. Great work! ^^

👍: 0 ⏩: 1

ken1171 In reply to OhJolly [2012-01-07 14:01:39 +0000 UTC]

Thanks! I was surprised she can pose so well considering the robot joint limitations. ^^

👍: 0 ⏩: 1

OhJolly In reply to ken1171 [2012-01-08 14:02:36 +0000 UTC]

It's exactly the same thing I tought! ^^

👍: 0 ⏩: 0

ibr-remote [2012-01-07 11:35:41 +0000 UTC]

Flagged as Spam

👍: 0 ⏩: 1


| Next =>