HOME | DD

Description
I have had a lot of people telling me they want to use my design idea... I had posted it to help out fellow cosplayers, but also to put it out there that I thought of this way first, as I still have not been able to complete the quadsuit.

All I want in return is that you don't say you thought of the design yourself, and say "I got the idea for the design of the suit from Lithe-Fider" or something. Then I'm cool with it. But if you do use my idea and go around saying you thought of it yourself that is PLAGIARISM and you should feel very bad about it.

...

More cosplayer insanity. I want to make a quadsuit of a realistic-to-the-game wolf Okami Amaterasu.

But yea, this is my plan for how I’ll do it…where the foam will be, how I stand, etc. (Drawn on top of my actual silhouette from a photo) I loved how this Kilala was done (she can be seen here: [link] ) , but it always bothered me how long the legs were. I decided I will try and do a suit that has me down on all fours at a flatter angle, so my butt is less in the air and my back legs are always kinda bent. It will have a thinner suit that is more lean / lithe looking like a real wolf, with a build up of foam on my thighs to fake a knee and foam on my calfs to fake the ankle.

The effect is completed by a fake head higher than my real head….hiding the fact my head is so low (and butt is still kinda in the air). My hands raised up only about 6 inches. If I do it right I should still be able to sit and walk around a little.

Yes it look super crude around where my hands are supported, I'm going to do something completely different there, I just had not designed yet how I'd do it at the time of this drawing, but in seeing some new quadsuits doing elastic joints just past the hand, that simulate a joint (while still supporting the wrist) I'll try something like that. Basically YES I'll support my hands better, though in a suit like this at such an angle I am expecting to be laying around / sitting a lot and not going too far walking wise on ll fours. I have pretty long arms...tho I also have long legs, so it like cancels out the arms. I won't actually be able to walk around on all fours as much.

So I can see / breathe, there will be a plastic white mesh in the neck front. The longer neck fur will overhang it so it will not be too visible. Maybe I can put in a little electric computer fan so it blows air past my head in that space and out through the mesh. :shock: The mouth of the wolf will be parted too so it will have airflow down through the open area of the neck inside.

The light blue-green parts are where the lower parts of the legs will be removable with Velcro. There will be a zipper all up and down the back.

I have some crazy ideas of hooking up an apparatus to my head so when I turn my real head it maybe turns the Ammy head a little from side to side…or if I tilt my head down it will open / close the jaw. Though atm I'd rather just get the head stable.

Description
I have had a lot of people telling me they want to use my design idea... I had posted it to help out fellow cosplayers, but also to put it out there that I thought of this way first, as I still have not been able to complete the quadsuit.

All I want in return is that you don't say you thought of the design yourself, and say "I got the idea for the design of the suit from Lithe-Fider" or something. Then I'm cool with it. But if you do use my idea and go around saying you thought of it yourself that is PLAGIARISM and you should feel very bad about it.

...

More cosplayer insanity. I want to make a quadsuit of a realistic-to-the-game wolf Okami Amaterasu.

But yea, this is my plan for how I’ll do it…where the foam will be, how I stand, etc. (Drawn on top of my actual silhouette from a photo) I loved how this Kilala was done (she can be seen here: [link] ) , but it always bothered me how long the legs were. I decided I will try and do a suit that has me down on all fours at a flatter angle, so my butt is less in the air and my back legs are always kinda bent. It will have a thinner suit that is more lean / lithe looking like a real wolf, with a build up of foam on my thighs to fake a knee and foam on my calfs to fake the ankle.

The effect is completed by a fake head higher than my real head….hiding the fact my head is so low (and butt is still kinda in the air). My hands raised up only about 6 inches. If I do it right I should still be able to sit and walk around a little.

Yes it look super crude around where my hands are supported, I'm going to do something completely different there, I just had not designed yet how I'd do it at the time of this drawing, but in seeing some new quadsuits doing elastic joints just past the hand, that simulate a joint (while still supporting the wrist) I'll try something like that. Basically YES I'll support my hands better, though in a suit like this at such an angle I am expecting to be laying around / sitting a lot and not going too far walking wise on ll fours. I have pretty long arms...tho I also have long legs, so it like cancels out the arms. I won't actually be able to walk around on all fours as much.

So I can see / breathe, there will be a plastic white mesh in the neck front. The longer neck fur will overhang it so it will not be too visible. Maybe I can put in a little electric computer fan so it blows air past my head in that space and out through the mesh. :shock: The mouth of the wolf will be parted too so it will have airflow down through the open area of the neck inside.

The light blue-green parts are where the lower parts of the legs will be removable with Velcro. There will be a zipper all up and down the back.

I have some crazy ideas of hooking up an apparatus to my head so when I turn my real head it maybe turns the Ammy head a little from side to side…or if I tilt my head down it will open / close the jaw. Though atm I'd rather just get the head stable.