HOME | DD

Description
MB3D 1.8.9

Guess some of you have the disease or witness so many people affected by it.

First time I use a parameter not made by me. The original was made by in his great work fav.me/d8djvsj I took a wrong initial approach and screwed up with the piping. My design was good but not neat. So, decided to make something different, closer to an artistic impression, and added _SphereInvC as a 5th formula. Something subtle happened.

The render could have been better, but the brutal colour shift and loss of mood were unacceptable. So, it was rendered at the best possible quality without affecting both. If you read this , I can give you some tips, as you were experiencing similar problems.

For what may be worth, it's still Ken's parameter, no matter the added formula, so here it is in case someone wants to give it a try:

Mandelbulb3Dv18{
g.....U0...c3...w....2I...UOcTJyWEnyzumqrSDeF28EHT5Ofjq3YzX/sJDRT.q..FqgY1sioLzj
................................JjTxl5eNa.2........Y./H/................y.2...wD
...Uz6...oUp..../Q.1/....2ExJ...M0....E4.....ckJn/oj1ClD/Q......TmfV0dkpXm1.OaNa
./kX0LDD12../.............................................U0y1..Uy1...sD...../..
.znX0LDDe.JWGGJUnwHr8ykSwhqsyElG.Zh3q0cDAvVO4Xuu0vvmyN/ixhT2zwfeDYeCx9nD.8BykXXp
Wv187RAgYfjAzKrl3P8yx5lDU.....2Ha...Ky/..2....sD.6....sD..G.....................
.............oAnAt1...sD....zw1.........................................I....k1.
.....Ksulz1.......kD.UzX1.kV..E.P....M2....M....m....c3....F....6/...cYt....SJ5Y
Zk1U.W1KEqxlci6.sU3Y.QAe906.2c..zzSi...pMnDnNqyD66gJ7KDgdz1..........2U.8.UQgk0.
.wUmc2beYz1.dA8E5Exwz0..........VIX0.I4QM0..IXBzAbNzzsF3VqZrgjyD..........E.2c..
zzzz............n/...................2./8.kzzzD............8....................
/EU0.wzzz1....................................8cU0.E./2Ezz/cU08../2E.tzDU08c..2E
./IzT/8cU0.E./2EQs5cU08../2E./bTU08c..2E./2ly/8cU0.E./2EMw5cU08../2E.lqTU08c..2E
./2kz/8cU0.E./2E...cU08czz/cU08cyz1cU08cxz3cU08c................................
E....I.//3U/....I....k....kIdJaQkVIOg7KNmF5...............................U/4MU/
4M........EaNaNaNad/.pAnAnAnA1.EnAnAnAnAXz1........wz...........................
.....................................YNaNaNaN0.E..........2.....................
.....................6.....3....1....wZFjl4NdtqN1FJNo7LMnE4.....................
06U............................E................................................
................................................................................
................................0....E....k...../pKMuZaPb/WEjV5.................
............5g..................AnAnAnAnozXaNaNaNaNwzIaNaNaNa/zD................
................................................................................
..........................................E.....I....I....EIp34Nm34RnE2.........
........................................................................t.A.....
................................................................................
.....................................................6.....3.........wpIkVKNmJKG
iNrE..........................................................0E................
................................................................................
................................................................}
{Titel: MB3D-10-0115 24-7 Connected Fever}

Ken was also kind enough to give me a very good explanation about the "plumbing issues":

"I can see where you might be having problems with "Steam Plant". The main formula that controls that whole fractal is SierpHilbert. If you start with the base formula presets and have your iteration counts at 1, start by setting the formula for Amazing Box, the changes won't be too big all you want to do is get the box shapes as clear as possible. On _FoldingCTetra3d, I found that basically the numbers act as switches with 0 being off and 1 being on, I used only FoldingC 2nd half and Folding XYZ. Now SierpHilbert controls every thing else, Set Scale and Cscales to whatever size you need, add in Rotation angle if you are adventurous, Edge 1 and 2 control rectangular shapes from a set point. Now the fun part, change the Iteration Count on Amazing Box to 2 and leave it, FoldingCTetra3d stays at 1, but SierpHilbert is increased until you get solid pipes, my setting is 4 but higher is ok. Once there, go back and fine tune SierpHilbert until you get your final outcome and do a render. I did all this with the Navi tool, there is a little check box that will set the Navi screen to High Quality that makes it easier to see what you are doing.

Hope this helps anyone who reads it."

Description
MB3D 1.8.9

Guess some of you have the disease or witness so many people affected by it.

First time I use a parameter not made by me. The original was made by in his great work fav.me/d8djvsj I took a wrong initial approach and screwed up with the piping. My design was good but not neat. So, decided to make something different, closer to an artistic impression, and added _SphereInvC as a 5th formula. Something subtle happened.

The render could have been better, but the brutal colour shift and loss of mood were unacceptable. So, it was rendered at the best possible quality without affecting both. If you read this , I can give you some tips, as you were experiencing similar problems.

For what may be worth, it's still Ken's parameter, no matter the added formula, so here it is in case someone wants to give it a try:

Mandelbulb3Dv18{
g.....U0...c3...w....2I...UOcTJyWEnyzumqrSDeF28EHT5Ofjq3YzX/sJDRT.q..FqgY1sioLzj
................................JjTxl5eNa.2........Y./H/................y.2...wD
...Uz6...oUp..../Q.1/....2ExJ...M0....E4.....ckJn/oj1ClD/Q......TmfV0dkpXm1.OaNa
./kX0LDD12../.............................................U0y1..Uy1...sD...../..
.znX0LDDe.JWGGJUnwHr8ykSwhqsyElG.Zh3q0cDAvVO4Xuu0vvmyN/ixhT2zwfeDYeCx9nD.8BykXXp
Wv187RAgYfjAzKrl3P8yx5lDU.....2Ha...Ky/..2....sD.6....sD..G.....................
.............oAnAt1...sD....zw1.........................................I....k1.
.....Ksulz1.......kD.UzX1.kV..E.P....M2....M....m....c3....F....6/...cYt....SJ5Y
Zk1U.W1KEqxlci6.sU3Y.QAe906.2c..zzSi...pMnDnNqyD66gJ7KDgdz1..........2U.8.UQgk0.
.wUmc2beYz1.dA8E5Exwz0..........VIX0.I4QM0..IXBzAbNzzsF3VqZrgjyD..........E.2c..
zzzz............n/...................2./8.kzzzD............8....................
/EU0.wzzz1....................................8cU0.E./2Ezz/cU08../2E.tzDU08c..2E
./IzT/8cU0.E./2EQs5cU08../2E./bTU08c..2E./2ly/8cU0.E./2EMw5cU08../2E.lqTU08c..2E
./2kz/8cU0.E./2E...cU08czz/cU08cyz1cU08cxz3cU08c................................
E....I.//3U/....I....k....kIdJaQkVIOg7KNmF5...............................U/4MU/
4M........EaNaNaNad/.pAnAnAnA1.EnAnAnAnAXz1........wz...........................
.....................................YNaNaNaN0.E..........2.....................
.....................6.....3....1....wZFjl4NdtqN1FJNo7LMnE4.....................
06U............................E................................................
................................................................................
................................0....E....k...../pKMuZaPb/WEjV5.................
............5g..................AnAnAnAnozXaNaNaNaNwzIaNaNaNa/zD................
................................................................................
..........................................E.....I....I....EIp34Nm34RnE2.........
........................................................................t.A.....
................................................................................
.....................................................6.....3.........wpIkVKNmJKG
iNrE..........................................................0E................
................................................................................
................................................................}
{Titel: MB3D-10-0115 24-7 Connected Fever}

Ken was also kind enough to give me a very good explanation about the "plumbing issues":

"I can see where you might be having problems with "Steam Plant". The main formula that controls that whole fractal is SierpHilbert. If you start with the base formula presets and have your iteration counts at 1, start by setting the formula for Amazing Box, the changes won't be too big all you want to do is get the box shapes as clear as possible. On _FoldingCTetra3d, I found that basically the numbers act as switches with 0 being off and 1 being on, I used only FoldingC 2nd half and Folding XYZ. Now SierpHilbert controls every thing else, Set Scale and Cscales to whatever size you need, add in Rotation angle if you are adventurous, Edge 1 and 2 control rectangular shapes from a set point. Now the fun part, change the Iteration Count on Amazing Box to 2 and leave it, FoldingCTetra3d stays at 1, but SierpHilbert is increased until you get solid pipes, my setting is 4 but higher is ok. Once there, go back and fine tune SierpHilbert until you get your final outcome and do a render. I did all this with the Navi tool, there is a little check box that will set the Navi screen to High Quality that makes it easier to see what you are doing.

Hope this helps anyone who reads it."