HOME | DD

sethbramwell — Repo coat and helmet complete

Published: 2010-12-31 12:03:16 +0000 UTC; Views: 2520; Favourites: 16; Downloads: 22
Redirect to original
Description Woo! Here's a decent pic (finally) of my Repo Man coat and helmet.

The first picture on the left is simply Repo with a Med-Bag, the middle is with scalpel, the end one is with scalpel with no flash.

I'd love some feedback! Thanks!
Related content
Comments: 27

AngelSlayer91 [2011-10-09 15:25:38 +0000 UTC]

The costume looks rather nice. I do have a question though. I've been trying to figure out what to do for the lights around the eyes. I've seen people use a LED strip but what I don't understand is what do you do for the power supply. Can the strips be charged and then used or do you have to make a portable battery for the strip. If there is anything you could suggest I would highly appreciate it.

👍: 0 ⏩: 1

sethbramwell In reply to AngelSlayer91 [2011-10-09 21:22:14 +0000 UTC]

Thank you! I've heard of the strip of lights too, but i heard about it too late. I used some LED battery powered Christmas lights. I cut out what I needed (About 7 or 8 lights) and wired them to two small 3v button cell batteries. I then wired in a tiny toggle switch I had lying around. The batteries and swith fit perfectly above the goggles under the top of the hat brim. Hope that helps! Good Luck! ^_^

👍: 0 ⏩: 0

AperatureScience [2011-02-13 05:41:40 +0000 UTC]

Awesome Job!

👍: 0 ⏩: 1

sethbramwell In reply to AperatureScience [2011-02-13 06:53:53 +0000 UTC]

Thank you! ^_^

👍: 0 ⏩: 0

Moose-sama [2011-01-11 06:53:31 +0000 UTC]

omfg....awesome

👍: 0 ⏩: 1

sethbramwell In reply to Moose-sama [2011-01-11 08:11:19 +0000 UTC]

Thank you! ^_^

👍: 0 ⏩: 1

Moose-sama In reply to sethbramwell [2011-01-11 08:13:56 +0000 UTC]

I want to do pavi do bads...but I have no idea how to do that face..

👍: 0 ⏩: 1

sethbramwell In reply to Moose-sama [2011-01-11 09:05:05 +0000 UTC]

i've heard of people doing a mold of their face and casting it. or of a clear face mask. There should be some tutorials online for it.

👍: 0 ⏩: 1

Moose-sama In reply to sethbramwell [2011-01-11 09:25:00 +0000 UTC]

I saw some..but they so expensive D: and I have no idea how to do work with such materials x.x

👍: 0 ⏩: 0

stories11 [2011-01-03 00:56:03 +0000 UTC]

That looks awesome, my dads been trying to make a repo man outfit for over a year, any tips for the helmet?

👍: 0 ⏩: 1

sethbramwell In reply to stories11 [2011-01-03 08:01:50 +0000 UTC]

Use a paintball mask for the base. That's what the prop makers actually did for the film. (I believe they used a "V-Profiler" mask.) It should be plastic so it can be modfied. I would suggest using a dremel or similar rotary tool to cut away some pieces to give it a facial shape and hollow a nose piece.

Some fantastic reference pics of the real deal are here: [link]

The real mask uses wet-molded leather. I just used the same pleather I used for my coat and gloves and hot glued it to the helmet after modifying it the way I wanted to. The hat definitely needs to be a separate piece, by the way.

Good luck! If you have any other questions, feel free to hit me up!

👍: 0 ⏩: 0

Karinta24 [2011-01-02 05:32:57 +0000 UTC]

It looks very shiny in those first two shots lol

👍: 0 ⏩: 1

sethbramwell In reply to Karinta24 [2011-01-02 09:18:11 +0000 UTC]

heh, it does. It was the flash.

👍: 0 ⏩: 1

Karinta24 In reply to sethbramwell [2011-01-02 09:21:46 +0000 UTC]

Figured as much, but still shiiiiiiiiiny.

👍: 0 ⏩: 0

PanicRoxMySox [2011-01-01 21:57:49 +0000 UTC]

Omg! This is perfect! Fantastic job!

👍: 0 ⏩: 1

sethbramwell In reply to PanicRoxMySox [2011-01-02 00:31:48 +0000 UTC]

Thank you!

👍: 0 ⏩: 0

TheLuridOne1885 [2011-01-01 03:26:48 +0000 UTC]

ah mr. repoman you are excllent fantastic cosplay of it and must ask, how comfortable are you in it?

👍: 0 ⏩: 1

sethbramwell In reply to TheLuridOne1885 [2011-01-01 20:17:25 +0000 UTC]

Thank you! It does get hot easily but the fabric itself is pretty comfortable. The helmet is a little rough because everything echoes inside it and you hear all your own breathing, but its not too bad because there is a good allowance of space for breathing.

Thanks again for the kind words!

👍: 0 ⏩: 0

DisturbingGoose [2010-12-31 18:18:12 +0000 UTC]

<3 Looks amazing 8D

👍: 0 ⏩: 1

sethbramwell In reply to DisturbingGoose [2010-12-31 19:14:04 +0000 UTC]

Thank you hun! ^_^

👍: 0 ⏩: 0

mckinneysh [2010-12-31 17:51:38 +0000 UTC]

I think im gonnna have to sick Nathan on you so i can get that outfit XDDDDDD great job!

👍: 0 ⏩: 1

sethbramwell In reply to mckinneysh [2010-12-31 19:14:25 +0000 UTC]

Hee hee, thanks! ^_^

👍: 0 ⏩: 0

Armondikov [2010-12-31 12:10:29 +0000 UTC]

This reminds me that I haven't watched Repo in ages. Great costume!

Though if you want some feedback, you can see in this pic that he has what looks like a black surgical mask on his mouth: [link] Adding that would complete the helmet by adding some extra detail to complete it.

👍: 0 ⏩: 1

sethbramwell In reply to Armondikov [2010-12-31 12:15:08 +0000 UTC]

I am wearing the mask in those pics... this pic shows the helmet without it. ([link] )

Thanks! ^_^

👍: 0 ⏩: 0

Emma-Fluffee [2010-12-31 12:05:00 +0000 UTC]

dude~ just saw you on the homepage and I knew it was you~ haha sorry I always love it when that happens
anyways~
It looks freaking awesome, adoring the helmet :3 its all so kwl!

👍: 0 ⏩: 1

sethbramwell In reply to Emma-Fluffee [2010-12-31 12:07:22 +0000 UTC]

hee hee Thanks! I'm surprisingly pleased with the helmet. ^_^

👍: 0 ⏩: 1

Emma-Fluffee In reply to sethbramwell [2010-12-31 12:09:26 +0000 UTC]

your welcome
you should be, its like so kwl O.O

👍: 0 ⏩: 0