Comments: 407
Schwoi [2017-01-26 14:16:44 +0000 UTC]
Frage: kann man evtl in irgendeiner .ini oder .conf oder so den Zoom beim Scrollen oder per Tasten "feiner" einstellen? ich finde die Sprünge von 50% - 75% - 100% - 150% etc etwas grob. Die einzige Möglichkeit irgendwas zwischendrin einzustellen scheint mir der Zoom-Slider beim Navigator...
👍: 0 ⏩: 0
Lunammi [2016-01-17 19:36:25 +0000 UTC]
THANK YOU!
👍: 0 ⏩: 0
panstarry [2015-12-05 22:41:43 +0000 UTC]
my brushes won't save, and i know that we have to use 'start-sai' to make sure that it'll save the brushes, but it won't for some reason? like everytime i try to use 'start-sai' it'll go 'can't run sai.exe createprocess failed with error 740' and honestly it's so frustrating because i have lots of nice brushes to use but i can't save them. (strangely enough, sai.exe still works...)
👍: 0 ⏩: 0
EdmondRad [2015-11-18 05:13:22 +0000 UTC]
When I have to edit the brushes in, its in wordpad not notepad. It also won't let me save them in the same format. What the fuck, now do I fix this shit? It's seriously irritating.
👍: 0 ⏩: 0
GeminaArtifex [2015-05-27 06:10:48 +0000 UTC]
I am highly confused on how to put the screen tones in.
Do I put them all in each folder.. Or what ;-;???
👍: 0 ⏩: 0
ItsPhobs [2015-04-20 16:48:31 +0000 UTC]
The easiest tutorial i found thank you
👍: 0 ⏩: 0
catgreen333 [2014-11-23 05:32:45 +0000 UTC]
verga
no hablo ingles
👍: 0 ⏩: 0
briar-spark [2014-10-09 10:27:11 +0000 UTC]
Hi, algenpfleger! Thank you very much for this tutorial, especially for importing textures!
👍: 0 ⏩: 0
Konekomoon [2014-07-10 08:17:38 +0000 UTC]
Thank you for this, I was just dropping the textures into the folders only and wondering why that wasn't working, I didn't know you also had to make an entry of it in a .conf file too. I did that and now the textures are in my SAI! Yay!
👍: 0 ⏩: 0
Shikimura [2014-07-03 03:04:33 +0000 UTC]
This took me awhile to understand *_* But it really helped, Thanks for making this <3
👍: 0 ⏩: 0
TheCartoonLife [2014-06-23 20:18:16 +0000 UTC]
Helpful but my head is spinning because I'ma noob XD
👍: 0 ⏩: 0
KanzenbanART [2014-02-18 18:00:55 +0000 UTC]
It's complicated to understand how to to those textures instalation.
👍: 0 ⏩: 0
ChadComics [2013-10-07 21:55:43 +0000 UTC]
this is very informative. thank you.
👍: 0 ⏩: 0
Jetstreamdraws [2013-10-06 19:52:25 +0000 UTC]
I have a question. My pen tool stopped working with pen pressure about a month ago, every other tool works just fine, except my pen tool. What do I do?
👍: 0 ⏩: 1
RoxiiReaper In reply to Jetstreamdraws [2014-03-30 09:56:56 +0000 UTC]
try making a new pen tool? you probably just messed with the settings for that tool.
👍: 0 ⏩: 1
Jetstreamdraws In reply to RoxiiReaper [2014-05-26 21:50:55 +0000 UTC]
Yes, thank you! Turns out, it was the min-size option.
👍: 0 ⏩: 0
fROSEn24 [2013-09-26 09:22:34 +0000 UTC]
i dropped the the files in the folder but im not really getting what exactly to do. I see the folders that you are talking in the sai folder but when i open my program I am still not seeing the new textures. PLEASE HELP.
👍: 0 ⏩: 0
PRUSSlA [2013-09-11 10:26:54 +0000 UTC]
Thank god for this tutorial xD
👍: 0 ⏩: 0
Mijolite [2013-08-07 21:09:24 +0000 UTC]
Nice tutorial, but I gotta disagree with the statement that Pressure tool is useless. For mouse users, it is very helpful to make a line that has thicker points and sharper points, because with mouse you cant just press harder or softer :/
👍: 0 ⏩: 0
amethrym [2013-07-21 01:13:11 +0000 UTC]
excellent tutorial :3
👍: 0 ⏩: 0
noodleluv0951 [2013-07-12 12:43:34 +0000 UTC]
I haz this fo free! and might I suggest..... make simpler!!!!!!
👍: 0 ⏩: 0
woesofthenorm [2013-06-17 01:58:54 +0000 UTC]
Thank you! I never even knew about custom patterns in SAI until I read this! Thank you so much! Invaluable.
👍: 0 ⏩: 0
draggersprez [2013-06-05 19:30:44 +0000 UTC]
Thanks for making this!
👍: 0 ⏩: 0
HyliaBeilschmidt [2013-04-23 19:26:35 +0000 UTC]
I know this is a very nooblike question but how do I scroll on the options/setting thing?
👍: 0 ⏩: 0
Xaviarluvya [2013-03-30 18:02:47 +0000 UTC]
Thank yyyoooouuu!!!
👍: 0 ⏩: 0
Jano19 [2013-03-11 10:40:59 +0000 UTC]
AWESOME tutorial!!
👍: 0 ⏩: 0
xSpickeyx [2013-03-03 21:02:12 +0000 UTC]
hilfreiches tutorial^^ jedoch versteh ich nicht ganz wie man neue pinselforem hinzufügt... könnest du mir bitte helfen? ^^'
👍: 0 ⏩: 0
TeacupArt [2013-03-02 06:49:00 +0000 UTC]
Thank you so much!
This was extremely helpful. <3
👍: 0 ⏩: 0
MomoHinamoru [2013-01-29 01:06:52 +0000 UTC]
why is there a thingie art should be easy dammit dammit
👍: 0 ⏩: 0
ArteDB [2013-01-24 19:34:40 +0000 UTC]
I can not open the folder "brushform.conf"..
👍: 0 ⏩: 1
tornadoz01 In reply to ArteDB [2014-08-01 23:59:31 +0000 UTC]
Try opening it with notepad?
👍: 0 ⏩: 0
Lumpous [2012-12-27 02:00:43 +0000 UTC]
I'd just like to ask which settings you would usually use for the pen tool while sketching, if I may.
👍: 0 ⏩: 0
Peach-Cobbler [2012-12-16 20:50:34 +0000 UTC]
Hi, I tried to add the screentones you generously provided, and tried to write the file names in the brushtext.conf file. But whenever I try to save it, it makes a new .BAK file and doesn't overwrite the current .CONF file.
If by chance it does overwrite, it becomes undone, once I open Paint Tool Sai. Not only is the tones not options for the texture, but when I open the brushtext.conf file again, it's like I never touched it. Please help. >.<
I used the notepad++ program and the normal notepad program to edit the .CONF file.
👍: 0 ⏩: 1
orihama [2012-11-27 01:41:10 +0000 UTC]
Do you like copy your screentones to brushtex? - u -''' Sorry, but it's really confusing for me.
👍: 0 ⏩: 0
WiggyBe [2012-11-05 17:08:14 +0000 UTC]
Wait, i dont understand how you get the screentones to be in Sai D8 What do you do for the papertex? :C
👍: 0 ⏩: 0
vedisdragon [2012-11-03 02:28:07 +0000 UTC]
Thanks so much!
I might just change it to the photoshop layout so that when I finally get PS, I wont have to spend too much time getting used to it.
👍: 0 ⏩: 0
Dragondog2233 [2012-10-29 19:08:35 +0000 UTC]
OH=MY=GOD=THANKYOU.
👍: 0 ⏩: 0
HeirOfGlee [2012-10-28 19:45:10 +0000 UTC]
changed most settings to photoshop
👍: 0 ⏩: 0
AguaRush11 [2012-10-10 03:19:32 +0000 UTC]
thank you!!
👍: 0 ⏩: 0
Foxy-Sierra [2012-09-08 22:44:57 +0000 UTC]
Nevermind, I got it to work after working with it some more. Awesome tutorial~
👍: 0 ⏩: 0
Foxy-Sierra [2012-09-08 21:24:35 +0000 UTC]
Ugh... I try to add a the entry into the .conf file and is says make sure the spelled path is correct after I click to save over the existing one and no matter how many times I try it won't update using the new 'start-sai.exe' path that has been used by other users of this program. It's frustrating that I can't get it to work!
👍: 0 ⏩: 0
Prasadstudios [2012-09-08 14:29:05 +0000 UTC]
Many Thanks to you .....
I am using Photoshop .....but your sai paint tool pictures more beautiful than Photoshop images...
Now I am learning sai paint by your tutorials ...................Thank you for your techniques
👍: 0 ⏩: 0
HetteMaudit [2012-09-04 16:39:05 +0000 UTC]
Oh, thanks for your help.
I was trying to understand what was this SAI.
👍: 0 ⏩: 0
| Next =>