HOME | DD

Crashmgn — medieval mummy head

Published: 2012-07-31 19:12:03 +0000 UTC; Views: 17138; Favourites: 367; Downloads: 266
Redirect to original
Description head close up
UPD: rendered it in higher resolution and changed some light settings
Related content

Crashmgn - medieval mummy

Crashmgn - stuff4fun

Crashmgn - emulsion smoker

Crashmgn - Ravager

Crashmgn - needle-tooth

Crashmgn - tadpole clay

Crashmgn - guardian

Crashmgn - Cyclops bust

Crashmgn - OMG wip's

obriy86 - Advent

Ravanna7 - SWR ShushRav AshAdeptHelm

HadiGhani - Doom Creature

Nahelus - Helmet concept

k0c0s - Monk_01

Jacknife45 - Terminator

Methelina - Organic unknown

BlazenMonk - Plugs

zerojs - work in progress - insect
Comments: 74

AustenMengler [2015-07-14 17:58:44 +0000 UTC]

So awesome!

👍: 0 ⏩: 0

miedziuszyn [2014-08-06 16:46:57 +0000 UTC]

Amazing ALL Yours Works !

👍: 0 ⏩: 0

Variones [2014-03-31 11:33:56 +0000 UTC]

Поразительная детализация, всё царапины и потертости на металле выполнены великолепно!   Эти кривые зубы с тянущийся слюной очень профессионально выполнены.  
Больше всего всего, повторюсь, меня притягивает металл, особенно шлем, гениально 

👍: 0 ⏩: 1

Crashmgn In reply to Variones [2014-03-31 17:41:46 +0000 UTC]

спасибище! ну до гениального тут конечно далеко но все равно приятно слышать что кому то нравица 

👍: 0 ⏩: 1

Variones In reply to Crashmgn [2014-03-31 18:32:50 +0000 UTC]

У меня вообще металл больная тема По мне так это одно из самых сложных элементов в рисовании. Потихоньку оттачиваю свой навык в металлической детализации. Интересно смотреть на труды того,  у кого он уже отточен))

👍: 0 ⏩: 1

Crashmgn In reply to Variones [2014-03-31 18:38:36 +0000 UTC]

трудно сказать что там наиболее сложное все нужно уметь думаю нарисовать человеческую рожу более менее убедительно не менее сложно чем металлический шлем
ну и ваще это 3d же... за меня тут много чо комп делает и щитает а в 2d тебе это нужно будет делать самой  вощим practice makes perfect! 

👍: 0 ⏩: 0

aaawhyme [2013-10-01 06:32:29 +0000 UTC]

what did you do to make the Salamis in 3D?

awesome job on this! amazing work! I looked at this and went ' YES, THIS IS WHAT I WANT TO MAKE! I want to do stuff like this! ' haha

very inspirational. I use Autodesk Maya to create 3d, is this the program you used? Zbrush?

👍: 0 ⏩: 0

metakrom [2013-09-09 04:18:53 +0000 UTC]

Impressive!

👍: 0 ⏩: 0

FelidaeCat [2013-07-31 09:37:17 +0000 UTC]

really nice job o.o great! i like the mouth

👍: 0 ⏩: 0

PavelLi86 [2013-06-24 02:19:49 +0000 UTC]

very realistic! what render?

👍: 0 ⏩: 0

Torpeking [2013-05-29 04:41:56 +0000 UTC]

awesome!.

👍: 0 ⏩: 0

Keestay [2013-05-04 00:35:58 +0000 UTC]

I like the stares >

👍: 0 ⏩: 0

Reanimated4now [2013-03-28 21:19:34 +0000 UTC]

buenooo

👍: 0 ⏩: 0

GJael [2013-03-20 16:17:17 +0000 UTC]

охуенный портрет! я почему-то тоже сразу подумал что UDK... наверное блестит похоже)
хочется задать кучу вопросов... а лучше бы вип поглядеть, особенно по текстурам/материалам/освещению... но пожалуй пойду помоделю, глядишь и сам так смогу когда-нибудь ))
супер вдохновляюще вышло! класс!!

👍: 0 ⏩: 1

Crashmgn In reply to GJael [2013-03-26 17:54:03 +0000 UTC]

спасибо!
к сажалению никаких випов нету, а вапросы безпраблем...задавайте

👍: 0 ⏩: 0

BenHinman [2013-03-19 08:11:18 +0000 UTC]

So tight dude! What did you texture it in?

👍: 0 ⏩: 1

Crashmgn In reply to BenHinman [2013-03-26 17:54:31 +0000 UTC]

zbrush and ps. Thanks!

👍: 0 ⏩: 0

alem3 [2013-01-18 18:31:03 +0000 UTC]

impressive has lots of details and the effect of light on them is very good

👍: 0 ⏩: 1

Crashmgn In reply to alem3 [2013-03-26 17:54:41 +0000 UTC]

thanks

👍: 0 ⏩: 0

ThomasAKing [2012-11-06 15:54:03 +0000 UTC]

this is really cool, nice lighting very vibrant. almost looks like the unreal engine.

👍: 0 ⏩: 1

Crashmgn In reply to ThomasAKing [2012-11-06 19:49:40 +0000 UTC]

is it? well ok never worked with UDK...it's a zbrush btw

👍: 0 ⏩: 1

ThomasAKing In reply to Crashmgn [2012-11-06 23:17:13 +0000 UTC]

yea I could tell its zbrush, I use a lot of zbrush as well, can always tell when its used.

👍: 0 ⏩: 0

anghorkheng [2012-09-30 11:54:41 +0000 UTC]

Cool, man!

👍: 0 ⏩: 0

kpt-flint [2012-09-27 17:46:06 +0000 UTC]

Ого! Только сейчас наткнулся.

👍: 0 ⏩: 0

scottellison92 [2012-09-06 11:47:03 +0000 UTC]

holy flying batshit!

👍: 0 ⏩: 0

TheGurch [2012-09-02 21:11:05 +0000 UTC]

Amazing lighting, stunning impact!

👍: 0 ⏩: 0

ErebusRed [2012-08-29 16:38:56 +0000 UTC]

Amazing monstrous!

👍: 0 ⏩: 0

Torpeking [2012-08-09 13:28:48 +0000 UTC]

Wow this ones nice boss.O_O

👍: 0 ⏩: 1

Crashmgn In reply to Torpeking [2012-08-11 20:54:53 +0000 UTC]

thanks Torpe

👍: 0 ⏩: 1

Torpeking In reply to Crashmgn [2013-05-29 04:31:31 +0000 UTC]

your welcome crashmgn.

👍: 0 ⏩: 0

Wasiqharis [2012-08-08 01:35:21 +0000 UTC]

GORGEOUS!!

👍: 0 ⏩: 1

Crashmgn In reply to Wasiqharis [2012-08-11 20:54:59 +0000 UTC]

thank u

👍: 0 ⏩: 0

eXecutex [2012-08-05 18:24:37 +0000 UTC]

Dat details !!! Amazing !!

👍: 0 ⏩: 1

Crashmgn In reply to eXecutex [2012-08-11 20:55:04 +0000 UTC]

thank u

👍: 0 ⏩: 1

eXecutex In reply to Crashmgn [2012-08-11 22:21:30 +0000 UTC]

np btw I have question about Zbrush.. I have really big problem. I use dynamesh, and on one subtool I can't increase the resolution, every time i control click and drag/drop i get the same resolution with the same number of polys... I have no idea how to solve this, I can't continue sculpting... pls tell me what should i do...

👍: 0 ⏩: 1

Crashmgn In reply to eXecutex [2012-08-11 22:47:09 +0000 UTC]

well it's hard to say the exact problem i had a similar issues when the projection mode is on at the dynamesh when zbrush stops to update the resolution i try to move o sculpt smth on the mesh and\or increase the dynamesh resolution and then ctrl click again sometimes i just subduviding the dynamesh as a regular mesh using ctrl+d shortcut but this can be a problem if you planning to redyno this mesh again. some time it can be helpfull to make pm3d from your subtool append it again make it dymesh and them project all the details from the original...so u can try smth from this maybe it will help but as i seid pretty hard to say the exact reason

👍: 0 ⏩: 1

eXecutex In reply to Crashmgn [2012-08-13 12:48:37 +0000 UTC]

Sorry for the late reply but thank you very much ! This was what i was doing but it doesn't help... I made a pm3d of the object, append it, project all, something happens, but when i turn on the dynamesh it changes, the resolution still the same..

👍: 0 ⏩: 0

AngelaMeadon [2012-08-02 15:16:28 +0000 UTC]

I'm loving this!

👍: 0 ⏩: 1

Crashmgn In reply to AngelaMeadon [2012-08-11 20:55:08 +0000 UTC]

thanks

👍: 0 ⏩: 0

sebazone [2012-08-02 07:41:46 +0000 UTC]

Awesome!

👍: 0 ⏩: 1

Crashmgn In reply to sebazone [2012-08-11 20:55:18 +0000 UTC]

big thanks

👍: 0 ⏩: 0

Maniac-Smith [2012-08-01 20:40:39 +0000 UTC]

Neato burrito!

👍: 0 ⏩: 1

Crashmgn In reply to Maniac-Smith [2012-08-11 20:55:25 +0000 UTC]

lol

👍: 0 ⏩: 0

iRj [2012-08-01 17:17:02 +0000 UTC]

оху*нно!
рендер - браш?

👍: 0 ⏩: 1

Crashmgn In reply to iRj [2012-08-01 17:21:52 +0000 UTC]

спасиб! агы все вбраше

👍: 0 ⏩: 1

iRj In reply to Crashmgn [2012-08-01 17:24:27 +0000 UTC]

цепи тоже в браше?! 0_0

👍: 0 ⏩: 1

Crashmgn In reply to iRj [2012-08-01 20:57:30 +0000 UTC]

сначала в кси патом как браш вышел новый в нем

👍: 0 ⏩: 0

MyBurningEyes [2012-08-01 15:33:34 +0000 UTC]

Awesome I just starting 3D so it's inspiring to see

👍: 0 ⏩: 1

Crashmgn In reply to MyBurningEyes [2012-08-01 17:20:42 +0000 UTC]

Thanks! glad you like it

👍: 0 ⏩: 0

MarkusVogt [2012-08-01 12:28:11 +0000 UTC]

Hi there!

just wanted to let you know that your artwork has been featured in my latest journal. Feel free to take a look at:

[link]

best
Markus

👍: 0 ⏩: 1


| Next =>