HOME | DD

enc86 — Stryker Collage

Published: 2013-04-11 23:50:00 +0000 UTC; Views: 6790; Favourites: 128; Downloads: 89
Redirect to original
Description The M1135 Stryker is a 8 wheeled armored vehicle produced by General Dynamics Land Systems for the United States Army. This model depicts the Nuclear, Biological, Chemical Reconnaissance Vehicle (NBCRV) variant. The NBCRV provides situational awareness and detection for various battlefield conditions. It's on on-board NBC sensor suite and integrated meteorological system provides real time testing for such threats. Armed with a Protector M151 Remote Weapon Station featuring a .50-cal M2 machine gun and smoke grenade launchers.
It should also be noted that the Stryker is considered to be a failure to many due to its heavy weight (too heavy for a c-130!) large target profile, only light armor protection(very vulnerable to RPG fire)poor off road performance, cost(about US $4.9 million each as of 2012) and various other issues [link]


This is a 1/35 trumpeter Stryker NBCRV, painted in enamels and weathered with art acrylics and pastels. Gear was from the bits box (I know a NBCRV wouldn't have any gear on the outside, but it looked so bare) and some decals were from the spare pile as well.Overall I was quite impressed with the kit, featuring tons of photo etched parts, cool details and nice molding. Little to no flash with only slight injection marks. This was by far the most complex and complicated model I have worked on and was a great value at $30us. The kit did have more than its share of fiddly bits, tiny parts and crazy set of instructions, because of that I had to plan my own the build and right order for sub assembly's. After spending many many hours with this thing I am kind of sad to finish it up. At some point I might make a diorama for it to be featured in but after all the complexly and small parts, I'll be taking a few days off and catching up on some video games.
Related content
Comments: 79

Furyblue [2014-03-09 05:56:28 +0000 UTC]

Nice job on that, gonna make a model of one or two of those my self one day.

👍: 0 ⏩: 1

enc86 In reply to Furyblue [2014-03-14 15:24:53 +0000 UTC]

thank you very much!

you should give it a try. this model was very nice and wasn't too bad on the wallet either.

👍: 0 ⏩: 0

Leave-Noone-Alive [2013-11-17 19:34:47 +0000 UTC]

Very impressive level of detail you got here. All the gear and odds and ends, it just looks right. 

👍: 0 ⏩: 1

enc86 In reply to Leave-Noone-Alive [2013-11-17 19:50:34 +0000 UTC]

thank you very much!

👍: 0 ⏩: 0

Bang-Doll-SSI [2013-05-05 05:54:57 +0000 UTC]

More great stuff! I'm not even a big fan of the Stryker, but this is pretty hot. Nice!

👍: 0 ⏩: 1

enc86 In reply to Bang-Doll-SSI [2013-05-05 13:23:31 +0000 UTC]

coming from you that means alot. lol you are like a modeling GOD to me.
anyways the Stryker is a big failure of military design but i really like how it looks. this project was a big challenge for me but i was able really increase my skills throu this build.

👍: 0 ⏩: 1

Bang-Doll-SSI In reply to enc86 [2013-05-05 15:47:20 +0000 UTC]

Aw, thanks! But nah, I'm no modeling god-- otherwise I'd be able to actually get some stuff finished at a faster rate than one model per year (I;m getting slower with age). lol Sorry, I've been away. That damn project has been killing me-- but I should be back more often to check out your work!

👍: 0 ⏩: 1

enc86 In reply to Bang-Doll-SSI [2013-05-05 20:56:20 +0000 UTC]

lol well a god to me, your builds have really helped inspire me to get better. i have studied some of your tanks more than a few times.

anyways cool, i look forward to hearing from ya and seeing more of your future work. ill have to pick your brain at some point, your techniques are very impressive.

👍: 0 ⏩: 1

Bang-Doll-SSI In reply to enc86 [2013-05-06 05:19:14 +0000 UTC]

Ah, well thankee! When I finally put this current stupid project to bed within the next couple weeks, I'll be getting back to tank building with a vignette of a King Tiger in snow. Hopefully, that'll turn out well (crosses fingers).

👍: 0 ⏩: 1

enc86 In reply to Bang-Doll-SSI [2013-05-06 14:25:50 +0000 UTC]

sounds great! and i am sure it will turn out awesome!

👍: 0 ⏩: 0

xparament [2013-04-23 03:21:03 +0000 UTC]

wow! im scared i just got hooked on another hobby! this looks like great fun

👍: 0 ⏩: 1

enc86 In reply to xparament [2013-04-23 03:39:34 +0000 UTC]

it really is a blast! it easy to fall in love with tiny bits of plastic. it can be very relaxing as well.

👍: 0 ⏩: 1

xparament In reply to enc86 [2013-04-23 16:26:26 +0000 UTC]

yeah...looks like my kind of thing! i wish i had the time

👍: 0 ⏩: 1

enc86 In reply to xparament [2013-04-23 19:00:02 +0000 UTC]

yea thats the one thing about models, they can take a ton of time. a simple bare bones kit takes me around 20-30 hours, something detailed like this Stryker takes over 80.

👍: 0 ⏩: 1

xparament In reply to enc86 [2013-04-24 14:03:13 +0000 UTC]

yeah i imagined it was like that... it would not be fun if it did not take time!

👍: 0 ⏩: 0

docholiday1974 [2013-04-19 03:03:28 +0000 UTC]

WOW!!!! the detail is amazing..... this is incredible!!!

👍: 0 ⏩: 1

enc86 In reply to docholiday1974 [2013-04-19 03:06:04 +0000 UTC]

thank you very much. i put alot of time and love into this one(and a ton of parts XD)

👍: 0 ⏩: 1

docholiday1974 In reply to enc86 [2013-04-19 03:10:39 +0000 UTC]

it shows man... if you have ever attempted miniatures you understand how much work that is..... incredible

👍: 0 ⏩: 0

DasMarc [2013-04-14 09:32:58 +0000 UTC]

Incredible details like every time dude! Love it

👍: 0 ⏩: 1

enc86 In reply to DasMarc [2013-04-14 13:34:50 +0000 UTC]

thanks a ton buddy, this one was crazy.

👍: 0 ⏩: 0

master-ninjabear [2013-04-13 22:37:12 +0000 UTC]

Damn.

👍: 0 ⏩: 1

enc86 In reply to master-ninjabear [2013-04-14 00:09:37 +0000 UTC]

XD
yea this thing was freaking crazy, and i put ALOT of time in. defiantly one of my better works and raised the bar for me.

👍: 0 ⏩: 1

master-ninjabear In reply to enc86 [2013-04-14 03:44:43 +0000 UTC]

To you and the others who do the museum-quality, movie studio grade work, I doff my cap to you, sir.

👍: 0 ⏩: 1

enc86 In reply to master-ninjabear [2013-04-14 13:40:15 +0000 UTC]

i am no where near that level but someday i might

👍: 0 ⏩: 1

master-ninjabear In reply to enc86 [2013-04-15 05:07:00 +0000 UTC]

I beg to differ, Grasshopper.
I'll have that pebble back now, please.

👍: 0 ⏩: 1

enc86 In reply to master-ninjabear [2013-04-15 13:53:01 +0000 UTC]

XD

👍: 0 ⏩: 0

AdamThung [2013-04-13 15:31:12 +0000 UTC]

i like the way u layed them out and how did u get the backround so white

👍: 0 ⏩: 1

enc86 In reply to AdamThung [2013-04-14 00:08:36 +0000 UTC]

thanks man, its kinda neat to do these "walk around" photos. get you thinking about different angles.

👍: 0 ⏩: 0

DarrenStrecker [2013-04-13 11:52:02 +0000 UTC]

Great work as always. I keep looking at it and finding new details. That bottle of water is too much, man. Love it.

👍: 0 ⏩: 1

enc86 In reply to DarrenStrecker [2013-04-14 00:11:59 +0000 UTC]

thanks man, i really went for it on this one, and put in alot of work.

yea that water bottle is freaking neat,really is cool as it gives off and instant sense of scale.

👍: 0 ⏩: 0

DeSynchronizer [2013-04-13 04:07:08 +0000 UTC]

"Ride in the Stryker you will never DIE...you will never die because theres a force field around the Stryker! ITS A STRYKER FIELD."

👍: 0 ⏩: 1

enc86 In reply to DeSynchronizer [2013-04-14 00:08:02 +0000 UTC]

lol yea its got special powers.

👍: 0 ⏩: 0

Boias [2013-04-12 22:57:01 +0000 UTC]

Awesome vehicle , you are doing great !

👍: 0 ⏩: 1

enc86 In reply to Boias [2013-04-12 23:18:11 +0000 UTC]

thanks man, it was a really good learning experience, pretty proud of my self XD

👍: 0 ⏩: 1

Boias In reply to enc86 [2013-04-13 00:22:52 +0000 UTC]

Yes you should be ! Bless you mate !great weekend!

👍: 0 ⏩: 0

Geosammy [2013-04-12 15:13:21 +0000 UTC]

Excellent build!

👍: 0 ⏩: 1

enc86 In reply to Geosammy [2013-04-12 15:45:51 +0000 UTC]

Thanks man!
i tried out a few new things on this one, including to scale tie downs for some of the gear.

👍: 0 ⏩: 1

Geosammy In reply to enc86 [2013-04-12 17:45:33 +0000 UTC]

That's a great Idea to add the tie-downs.

To often this detail is missing/left out from armor models. In the 'real world' anything and everything is tied down somehow, or it will eventually fall off.

Nice J.O.B...

👍: 0 ⏩: 1

enc86 In reply to Geosammy [2013-04-12 17:51:15 +0000 UTC]

yea its something you have told me on more than one occasion but i often forget or get lazy. one this one i remembered some spare photo etched ones i never use and i gotta say the effect is quite cool IRL. its something ill have to remember going forward(maybe make them outta card stock next time)
anyways thanks again for both the idea and compliment.

👍: 0 ⏩: 1

Geosammy In reply to enc86 [2013-04-12 18:51:10 +0000 UTC]

No problem...

I use to use empty toothpaste tubes, the material they were made of was very malleable and the right thickness. Cut into thin strips, it looked very convincing as tie-downs.
I'm not sure if tooth-past tubes are still made of that same stuff though.

👍: 0 ⏩: 1

enc86 In reply to Geosammy [2013-04-12 18:53:39 +0000 UTC]

ummm i get what your saying, that thin plastic kinda stuff... think i might be able to try that out, good tip. lol yell at me if i forget.

👍: 0 ⏩: 1

Geosammy In reply to enc86 [2013-04-12 19:08:02 +0000 UTC]

I think there now made of plastic, but what I'm talking about was some kind of medal. Don't think there made that way anymore.
Maybe some kinds of ointment tube similar to this... [link]
Empty of course.

👍: 0 ⏩: 1

enc86 In reply to Geosammy [2013-04-12 19:11:03 +0000 UTC]

ahhhhh yes, i know the type. my wife works at a hospital, i am sure she would know.i have a garage full of random stuff too, ill have to be on the look out.

👍: 0 ⏩: 1

Geosammy In reply to enc86 [2013-04-12 19:18:03 +0000 UTC]

Yeah... I think the material is really thin aluminum.

👍: 0 ⏩: 0

Shay-Tank-Dragon-41 [2013-04-12 15:10:00 +0000 UTC]

Another recurit joins your US armory XD

Great details lad o.o....your armor is defiently one of my fav's out there

👍: 0 ⏩: 1

enc86 In reply to Shay-Tank-Dragon-41 [2013-04-12 15:46:19 +0000 UTC]

XD

thanks a ton buddy, glad you like them so much. i am honored to be one of your favs.

👍: 0 ⏩: 1

Shay-Tank-Dragon-41 In reply to enc86 [2013-04-12 16:09:45 +0000 UTC]

👍: 0 ⏩: 0

katze316 [2013-04-12 12:33:36 +0000 UTC]

So much detail! I especially love the water bottles on top

👍: 0 ⏩: 1

enc86 In reply to katze316 [2013-04-12 13:25:09 +0000 UTC]

thanks dude, this thing is pretty loaded up with detail!

👍: 0 ⏩: 0

PsykoHilly [2013-04-12 11:07:07 +0000 UTC]

Awesome work

👍: 0 ⏩: 1


| Next =>