HOME | DD

Description
Design: Walkthroug:

The Project
My fiancé and I are working on the project of making a wolf fullsuit. It should be wearable for days, to go on a Live Action Role Play (LARP). But we want to do it with different Addons, like stilts and when its possible Anmiatronics inside.

This is the the part where I show how I made the tail in my little photo-walkthrough for my manwolf.

Materials
fake fur, hot glue, hose, metal screws with a hole at the and, string, wire, fleece

knitting the fur
At first I made a pattern out of paper and brought it on the fur. Be careful to watch the direction of the fur. I knittet them togehter, the left side out.
At first I made it 80cm long, but when it turned out to look to much like a fox I shortened it round about 15cm.

making the attachment
I took wire, swirled it and glued it into the hose. I knittet it to a piece of leather which was cuttet that you could put a belt throug it.
I made the littel screws in the hose and runned it in and bended it around the last one. It should help to bring it in form. I recognized the moving tails move more catlike, so I prefered an easier version without two moving strings.
With hot glue I glued one of the ring-screws in the end of the hose.

putting togehter and filling
I took the sack of fur and pulled it over the hose. Then I knitet the tip to the last screw. I filled it with fleece and knittet it to the leather.

colour
I´m going to give the tail some more gay colour. But it will be added when the rest of the suit is finished.

Credit
The cast head is made by
This Mask-making Project is inspired by: and the nice helping people at Larper-Ning ( ) [link]

Description
Design: Walkthroug:

The Project
My fiancé and I are working on the project of making a wolf fullsuit. It should be wearable for days, to go on a Live Action Role Play (LARP). But we want to do it with different Addons, like stilts and when its possible Anmiatronics inside.

This is the the part where I show how I made the tail in my little photo-walkthrough for my manwolf.

Materials
fake fur, hot glue, hose, metal screws with a hole at the and, string, wire, fleece

knitting the fur
At first I made a pattern out of paper and brought it on the fur. Be careful to watch the direction of the fur. I knittet them togehter, the left side out.
At first I made it 80cm long, but when it turned out to look to much like a fox I shortened it round about 15cm.

making the attachment
I took wire, swirled it and glued it into the hose. I knittet it to a piece of leather which was cuttet that you could put a belt throug it.
I made the littel screws in the hose and runned it in and bended it around the last one. It should help to bring it in form. I recognized the moving tails move more catlike, so I prefered an easier version without two moving strings.
With hot glue I glued one of the ring-screws in the end of the hose.

putting togehter and filling
I took the sack of fur and pulled it over the hose. Then I knitet the tip to the last screw. I filled it with fleece and knittet it to the leather.

colour
I´m going to give the tail some more gay colour. But it will be added when the rest of the suit is finished.

Credit
The cast head is made by
This Mask-making Project is inspired by: and the nice helping people at Larper-Ning ( ) [link]