HOME | DD
chioky — How to make a Tiburon P1
Published: 2010-01-03 12:35:21 +0000 UTC; Views: 7265; Favourites: 91; Downloads: 134
Redirect to original
Description
Here we have it a tutorial on how to make Tiburon the zanpakuto that Tia Harribel the 3rd Espada uses in the anime BleachHere is a link to Part 2 of the tutorial: [link]
Related content
Comments: 44
omgosh this is the greatest tutorial ever!! I am so happy i found it and very happy you made it is amazing...and though I'm sure you have been told this many times i really really want to thank you so much for it. I'm so excited now to finish my Halibel cosplay lol just got to get some of these supplies to make this. Again thank you sooooooooo much >w<
👍: 0 ⏩: 1
you tell me how your tiburon goes yeah?
👍: 0 ⏩: 1
of course i will!!
You will defiantly be the first to know about it when I am done
👍: 0 ⏩: 0
Thaaank yoou
alot easier to find then i thot
imma need to make friends wit a carpenter type 
thanx again
👍: 0 ⏩: 1
hi. quick question
how long and wide is the MDF wood for the tsubasa?
👍: 0 ⏩: 0
no i'm definitely making it myself, i mean to get the tools and materials
👍: 0 ⏩: 0
Will the prinout for the tsuba be big enough? I mean if i just print it staright off the computer, i wont have to make any conversions?
👍: 0 ⏩: 1
proberbly gonna have to print it off a few times
👍: 0 ⏩: 1
darn...like at a kinkos or something? how big should i make it?
👍: 0 ⏩: 0
Hi *chioky,
I have a question:
how thick should the wood be to make this weapon?
Because i made some other swords, but every time i make someone i need to change the size of the center in the tsuba...
👍: 0 ⏩: 1
o ok, thx
but is that not too thin?
thx thx thx, this helps a lot...
i have made grimmjow, komamura and ichigo's sword
i'm working on ulquiorra's sword
and your draws of tsuba's is that the size that i need?
👍: 0 ⏩: 1
yes it is the size I need, stick to it
👍: 0 ⏩: 1
o ok Thx for the information!
I have another question:
by tiburon part 2,
how do you get that together by picture 21 en 22? with woodfiller?
and how do you know which angle you need to place the balsa wood?
thx thx thx
👍: 0 ⏩: 1
there is no picture 21 and 22 on this deviation
you draw the angle down
👍: 0 ⏩: 1
Chioky once again helping out the commuty, great tutorial, really well explained in all ways possible, from the actual procedures to the materials, wood types and so on.
Thanks, might use this later on for another sword ^^
👍: 0 ⏩: 1
might use this for another sword? like knowing how to cut out a hollow center? 8P
👍: 0 ⏩: 1
EXACTLY X'D I was thinking about the Sword of Aeons, from Fable. But might be a bit different since it has seperate edges.
This helps either way!
👍: 0 ⏩: 0
some trade secrets are needed in any industry for people to continue to make money. :>
👍: 0 ⏩: 1
I was wondering on how to make a hollow sword like this (no pun intended?).
👍: 0 ⏩: 1
I can "see right through" your pun
👍: 0 ⏩: 0
Arrg sir! Such a vibrant purple enough to burn through your retinas. Might I suggest desaturating it a tad and perhaps making it lighter XD. Perhaps similar value as the background of this page.
👍: 0 ⏩: 1
I suggest wearing sunglasses 8P
👍: 0 ⏩: 0
great hehehehe nice tut, so easy to follow XD difficult to apply 
👍: 0 ⏩: 1
hmm, I have no idea what your talking about
👍: 0 ⏩: 0
I wish i have the items needed to make it and I wish I can do it
👍: 0 ⏩: 1
I wish I could just take all of your swords FREELY....
👍: 0 ⏩: 0
its funny i just started a kyoka suigetsu today for expo n_n, using your guide for the tsuba and handlewrap to :G.
👍: 0 ⏩: 1
then I hope you make a good sword
👍: 0 ⏩: 1
Wow, this is very impressive Chioky, job well done. =3
👍: 0 ⏩: 1
